Tplink wr882n Router Setup method

Tplink wr882n Router Setup method

Step One: Router installation

1, telephone line Internet: users need to prepare 2 network cable, a network cable used to connect ADSL modem and Tp-link tl-wr882n wireless Router WAN interface; Another network cable is used to connect the LAN interface between the computer and the TL-WR882N router (1/2/3/ Any one of the 4 is OK).

2, Optical brazing: Users need to prepare 2 network cable, one of the network cable used to connect the light cat and the TL-WR882N router WAN interface, another network cable to connect the computer and the TL-WR882N router LAN interface (any of the 1/2/3/4 can).

3, network cable home: Users need to prepare 1 network cable, the first broadband operators to provide the user's home of the network cable inserted in the WAN interface of the TL-WR882N router, and then the preparation of this network cable, a connection to the computer, the other end of the connection tl-wr882n router LAN interface (1/2/3/ Any one of the 4 is OK).

Note: After the connection completes, check that the router's LEDs are normal.

Step Two: Configure the computer IP

Whether it is now configured TL-WR882N router, or later through the tl-wr882n to the Internet, the computer's IP address is best configured to automatically obtain (dynamic IP address); otherwise, it is easy to have a variety of problems, detailed configuration method please read the article: Computer dynamic IP Address set method.

Step Three: Configure the TL-WR882N router

1, Login Settings interface: Run the Computer browser, in the browser's address bar input tplogin.cn and then press ENTER, will pop up a dialog box. tplogin.cn not open? Click to read: tplogin.cn not open solution

2, set the login password: The first time to log on to the TL-WR882N router, users need to manually set a login password; set the admin password--> in the "Set Password" box and enter--> Click OK again in "Confirm password".

Note: If you have set up your management password, you will be prompted to enter a password dialog box, the user only need to enter a previously set password to log in.

3, Run the Setup Wizard: Enter the password to login, the router will automatically eject the Settings Wizard interface, if not pop-up, you can click on the left menu of the "Setup Wizard" to run.

4, choose the way of Surfing the Internet: select "PPPoE (ADSL virtual dial)"--> click "Next".

5, configure the Broadband account and password: input broadband operators to provide broadband account and password--> click "Next".

6, configure the wireless network: "SSID" that is, the wireless network name, users according to their own needs to set--> tick "WPA-PSK/WPA2-PSK"--> set "PSK password"--> click "Next".

7, restart the router: click "Reboot"--> in the pop-up dialog box click "OK".

8, restart completed, login to the Tp-link tl-wr882n wireless router settings interface, click "Run state"--> View "WAN status", if the display has been obtained IP address information, such as the following figure shows that the setting is successful, can be normal Internet.