TPLINK[WVR Series] PPTP VPN Configuration guide

Source: Internet
Author: User
Application Introduction
The PPTP VPN PC to site mode provides the terminal with a secure tunnel to the Headquarters network. If you are on a business trip, you can connect to the Internet, use the terminal's own VPN client dial-up connection, and establish a secure tunnel for data transmission.
This article describes how to build a PPTP VPN server and use each type of client to connect to a VPN.
Note: This article introduces the configuration method in the WVR series new version interface, similar to the older version of the interface Setup method.
Set method
First, set up a PPTP VPN server
[1] add a VPN address pool
Login Router interface, click VPN > user admin > IP address pool , click, create VPN address pool.
[2] Add Users
Click VPN > User Management , click, add the corresponding user:
Note: The local address is the administrative address that the VPN client accesses the router. The most general session number can be customized settings.
[3] add PPTP Server
Click on VPN > PPTP > PPTP Server , click on, set as follows:
Note: The service interface is an outbound interface that can be connected to the Internet. VPN clients use the IP address domain name of this interface for VPN dialing.
[4] add napt rule
Click Advanced Features > NAT settings > Napt, click, add the following napt rules, The purpose is to enable dial-up clients to access the Internet via this router:
Note: The source address range fills in the address of the VPN address pool, and the interface is selected to connect to the Internet.
The PPTP VPN server has now been set up to complete.
Second, set up PPTP client dialing
Computer, mobile phone or different operating system client PPTP playback mode is different, please select the client operating system, refer to the corresponding guidance document:
         
After client dialing succeeds, client information can be displayed in PPTP server tunneling information.
Third, the connection is successful, access network
After the terminal connection succeeds, the corresponding entry appears in the VPN > PPTP > tunneling Information list , as shown in the figure:
at this point, the PPTP VPN settings are connected successfully and the VPN client can access the Internet and access the Headquarters intranet.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.