Transfer files using the Super Terminal and arm Development Board in Windows

1. Choose Start> program> attachment> communication> Super Terminal to open the Super Terminal.

2. Set

Enter the name and select the com serial port (Be sure to select the serial port)

Select 115200 for the number of bits per second (that is, the baud rate), 8 for the data bit, 1 for the parity check, and none for the data stream control.

3. Connect to the arm Development Board

It can be found that the operations below are the same as those under minicom in Linux.

4. Send files

Select transfer in the main window-> send file, or right-click the Super Terminal command line to send the file, and then select the file to be transferred in the displayed dialog box, select zmodem and crash reply for the protocol, and click send.

Reference

Http://lizigang1983.blog.163.com/blog/static/6212465200771811540102/