Troubleshooting Issues with ARCGIS Server Publishing services

Source: Internet
Author: User

Target= ' CFH. Configurationfactoryhost '

Machine= ' ibm3850x5 '

Thread= ' 24072 '

Elapsed= ' 0.31200 ' >server Object instance is successfully created on machine ibm3850x5.</msg>

<msg

Time= ' 2011-11-15t13:25:49 '

Type= ' INFO3 '

Code= ' 4006 '

Target= ' CFH. Configurationfactoryhost '

Machine= ' ibm3850x5 '

Thread= ' 24072 '

Elapsed= ' 0.32800 ' >server Context created.</msg>

<msg

Time= ' 2011-11-15t13:25:50 '

Type= ' INFO3 '

Code= ' 4007 '

Target= ' CFH. Configurationfactoryhost '

Machine= ' ibm3850x5 '

Thread= ' 24708 '

Elapsed= ' 0.99800 ' >server Context released.</msg>

<msg

Time= ' 2011-11-15t13:25:50 '

Type= ' INFO3 '

Code= ' 4000 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Thread= ' 22952 ' >container

6732

Is

Successfully

Created on machine ibm3850x5.</msg>

<msg

Time= ' 2011-11-15t13:25:50 '

Type= ' INFO3 '

Code= ' 4001 '

Target= ' Nmdis/topic_binhaishidi. MapServer ' thread= ' 22952 ' >thread 17336 is successfully created

On container 6732 of machine ibm3850x5.</msg>

<msg

Time= ' 2011-11-15t13:25:52 '

Type= ' INFO3 '

Code= ' 10092 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Methodname= ' Mapserver.mapreader

. Open '

Machine= ' ibm3850x5 ' process= ' 6732 ' thread= ' 17336 ' >mapreader.open has started.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' INFO3 '

Code= ' 10093 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Methodname= ' Mapserver.mapreader

. Open '

Machine= ' ibm3850x5 '

process= ' 6732 '

Thread= ' 17336 '

Elapsed= ' 0.73728 ' >mapreader.open

Has

Completed.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' ERROR '

Code= ' 1016 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Machine= ' ibm3850x5 '

Thread= ' 22952 '

Elapsed= ' 3.05800 ' >server Object instance creation failed on machine ibm3850x5. </Msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' INFO3 '

Code= ' 4002 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Thread= ' 22952 ' >container

6732

Of

Machine

IBM3850X5 is removed.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' INFO3 '

Code= ' 4003 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Thread= ' 22952 ' >thread

17336

Removed

From

Process 6732 of Machine ibm3850x5.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' ERROR '

Code= ' 1008 '

Target= ' Nmdis/topic_binhaishidi. MapServer '

Thread= ' 25292 ' >configuration

Nmdis/topic_binhaishidi. MapServer can started.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' INFO3 '

Code= ' 4006 '

Target= ' CFH. Configurationfactoryhost '

Machine= ' ibm3850x5 '

Thread= ' 22812 '

Elapsed= ' 0.00000 ' >server Context created.</msg>

<msg

Time= ' 2011-11-15t13:25:53 '

Type= ' INFO3 '

Code= ' 4007 '

Target= ' CFH. Configurationfactoryhost '

Machine= ' ibm3850x5 '

Thread= ' 24536 '

Elapsed= ' 0.01600 ' >server Context released.</msg>

<msg

Time= ' 2011-11-15t13:26:23 '

Type= ' INFO1 '

Code= ' 2033 '

Target= ' CFH. Configurationfactoryhost '

Thread= ' 25236 ' >the

Server

Object

Instance

Is

Shutting

Down because the Idle Timeout Interval have elapsed</msg>

<msg

Time= ' 2011-11-15t13:26:23 '

Type= ' INFO3 '

Code= ' 4002 '

Target= ' CFH. Configurationfactoryhost ' thread= ' 25236 ' >container 5296 of Machine ibm3850x5 is

Removed.</msg>

<msg

Time= ' 2011-11-15t13:26:23 '

Type= ' INFO3 '

Code= ' 4003 '

Target= ' CFH. Configurationfactoryhost '

Thread= ' 25236 ' >thread

18088

Removed

From

Process

5296 of Machine ibm3850x5.</msg>

2

Problem analysis

2.1

Software Environment

The environment is as follows:

Windows Server R2

Operating system (comes with

IIS 7.5

ArcGIS Server 10.0. NET

Version.

2.2

Reason guessing

Based on past experience, there are several possible reasons for guessing.

2.2.1

License Expiration

This is the first reason to be excluded because the customer has already purchased a permanent formal license. Moreover, image services and

Gp

Services are

can be published.

2.2.2

Not enough memory

On the test machine there are

8GB

Memory, when service publishing fails, memory consumption is only

50%

, so the basic exclusion of memory is not

The possibility of a foot.

2.2.3

Security restrictions

This is more likely, such as firewalls, data access rights, and so on.

So first check the firewall, has closed all, to exclude the possibility.

The data permissions are then checked:

Ensure that the current

ArcGIS

Server

Account (already integrated into

Administrator

) for the test

Shapefiles

Folders and

Shapefiles

The file has read and write permission, the same problem has been tested;

Will

Shapefiles

Data import

File

Geodatabase

, make sure that the user

File

Geodatabase

Access rights, the tested

The same problem still exists in the trial;

Will

Shapefiles

Data import

ArcSDE

, the same problems are still being tested;

After the above test, it also basically excludes the possibility of insufficient permissions.

2.2.4

Data error

This possibility is also relatively large, so the data are tested.

From the previous successful release,

And now a few layers are being tested in the service data source that is running normally,

Find that there is still the same

Problems of the kind;

Completely create a new

Shapefiles

, the editor adds the simplest graphics and still has the same problem;

Optimized analysis of map documents that failed to publish,

Without any errors or warnings,

Save As

Msd

The document is then published,

The same problem still exists;

After the above test, also basically ruled out the possibility of data errors.

3

Problem solving

3.1

Problem Locator

The above analysis confirms that the license is correct, that the memory is sufficient, the permissions are correct, the data is correct, and the image service,

Gp

Clothing

Can be published, so the biggest possibility is that the map service-related configuration information is out of the question.

And when I was publishing a map service,

In addition to specifying the service name,

The other properties completely use the default configuration information.

Because

This inference should be the default configuration information in addition to the problem.

However, previously released services are default configurations that are used

Why is there no problem? The newly published service properties are then

The running service properties were one by one compared to the problem, and the output directory of the original service was

None

, the picture returns

Type is

MIME only

Such as:

While the newly released service, the output directory has been specified, the virtual directory is empty, but the picture return type is

Mime+url

The way! As shown in the following:

Here, finally found the problem, and then began to verify:

Change the output directory to

None

, the shape return type automatically becomes

Mime

Only

, and then start the service, success! Re-release the new

The map service, Success!

This is a stopgap measure, or it is better to use the correct virtual directory, so the correct virtual directory is reset below.

3.2

Change Directory

In

ArcCatalog

Or

ArcMap

Of

Catalog

Panel,

Found it

Gis

Server connection,

Then right-click on the server-

-Server properties, open the "Contents" tab, as shown in:

Sure enough, the virtual directory is empty. Click the Edit button to specify a virtual directory for the directory, as shown in:

The virtual path that you enter should be

Web

Real-World on the server, as in

Iis

In

The cache directory, in turn,

Enter a directory,

Output directory,

The working directory and the index directory specify the virtual path,

Then close the service

The Properties dialog box for the device.

Modify the Map service properties to specify the output directory as native

Arcgisserver

Under the

Arcgisoutput

, this time the virtual

The pseudo-path is automatically populated with the path you just specified, and the image return mode is automatically adjusted to

Mime+url

Mode, restart

Service, Success!

4

Summary

In fact, the problem is not very complicated,

But there are many reasons for this problem,

We need to calmly analyze the exclusion,

Until

Find the last true murderer.

The idea of solving the problem,

Should be first based on one's own or others ' experiences,

Make a list of possible causes,

And then divide it individually.

Analysis and testing,

With a variety of tools,

such as logs,

Network analysis tools, and so on.

When you exclude a possible cause,

The truth will soon surface.

To here,

The problem has finally been solved,

I also looked up some information from the Internet,

A lot of people, too.

The answer is all

multifarious,

But not the same as the situation I encountered,

So deliberately documenting this situation,

Hope someone in the future

If you encounter the same problem, you can have a reference

Troubleshooting Issues with ARCGIS Server Publishing services

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.