Turbomail email system Microsoft activity directory (AD) Verification setting Guide

Turbomail mail system Microsoft activity directory (AD) Verification setting guide overview

This Guide describes how the turbomail Mail Server synchronizes user data with the Microsoft Active Directory (AD) and verifies users. The user authentication structure of turbomail mail server is as follows:

The verification server is used as the verification center for cross-database, LDAP (AD) servers. The turbomail email server sends the verification request to the verification server. The verification server then reads and verifies the corresponding user information based on the specific background user information storage type.

Authcenter server settings

Open the authcenter/CONF/sys. conf configuration file and add the following data server information:

Auth_type = AD

Ldap_server = 192.168.18.90

Ldap_port = 389

Ldap_base_dn = Cn = users, Dc = A, Dc = com

Where:

Auth_type = aD indicates that the verification type is ad

Ldap_server specifies the address of the Active Directory Server.

Ldap_port specifies the ad server port number, which is generally 389

Ldap_base_dn specifies the base DN of the AD Query

The mail server settings go to the mail system management interface, system settings-"LDAP parameters,

Set relevant Ad server parameters.

Configure the authentication center and go to system settings-> authentication center.

Go to system settings-> general parameters, and specify the system authentication type as "authentication center (AD.

Procedure

After the configuration is completed, the system startup procedure is as follows:

1) Start the Data Server

2) Start the authcenter server (use startserver. bat or startserver. Sh to start the script)

3) Start the WebMail Server

4) Start the email server

Synchronize ad users

Go to administrator> domain management to add a domain name. Log on to administrator> system Settings> Import Active Directory. Set the synchronous deletion mode. Users deleted from ad can be processed in the mail system in three modes.

1) do not process, that is, AD deletes a user, and the mail system does not process it to retain the user.

2) delete a user, that is, the user is deleted on the ad, and the user is also deleted on the mail system.

3) disable the user, that is, delete the user on the ad. The mail system retains the user, but the mail system automatically disables the account.

Set the synchronization interval, that is, the synchronization cycle. The unit is seconds. If the value is smaller than or equal to 0, the synchronization is not performed. If you need to perform regular synchronization, set the synchronization interval.

After the import is successful, the user information synchronized from ad is displayed in the user list.