The host settings are as follows:
1. Run the command prompt as an administrator:
Shortcut key win+r→ Enter cmd→ carriage return 2, enable and set virtual WiFi network card:
Run command: netsh wlan set hostednetwork mode=allow SSID=WUMINPC Key=wuminwifi (12345678) This command has three parameters, mode: Whether the virtual WiFi card is enabled, Change to disallow is disabled.
SSID: Wireless network name, preferably in English (for example, WUMINPC).
Key: Wireless network password, more than eight characters (take Wuminwifi as an example).
The above three parameters can be used alone, such as using only Mode=disallow to disable the virtual WiFi card directly.
Once successful, the network connection will have one more card for "Microsoft Virtual WiFi Miniport Adapter" Wireless connection 2, for convenience, rename it to virtual WiFi. If not, just update the wireless network card driver OK.
In the lower right corner of the computer "Open Network Center and share"-> "change the appropriate configuration settings"-> "local Broadband"-> "Properties"-> Main: Home network connection: Virtual WIFI3, set up Internet Connection Sharing:
In the Network Connections window, right-click a network connection that is connected to the Internet, select Properties → share, and click Allow others. Connect (N) and select "Virtual WiFi is OK, the" shared "word appears next to the shared network card icon, indicating that the broadband connection is shared to the virtual WIFI4 and the wireless network is switched on:
Continue running at the command prompt: netsh wlan start hostednetwork (to turn off the wireless network by turning start to stop), then enable the wireless network once it is turned on and then run this command again. So far, the Red fork of the virtual WiFi disappears, The WiFi base station has been assembled and the host has been set up. Notebook, with WiFi module mobile phone and other WUMINPC search to wireless network, input password Wuminwifi, you can share the internet!
Attach: Display wireless network information command: Netsh WLAN show hostednetwork virtual wireless AP Launch WLAN is the 802.11G standard, bandwidth for 54mbps2013.1.4 5. If the broadband connection that you want to share-> properties- > Sharing probably means "sharing is not available, error is 0x8000500" Workaround: Turn the firewall on 6. If you enter the Netsh wlan start hostedwork return, the solution cannot be loaded: Turn on the wireless network port light on your computer (Generally the Fn+f shortcut "according to your computer, you can see how it is opened")