Tutorial on creating a USB flash drive

After the download is complete and the installation is complete, you can use this software to create a USB flash drive. The specific steps are as follows: (this tutorial takes the U disk boot master general edition as an example, the Professional Edition tutorial is the same as this tutorial)

Important: Back up the data in the original USB flash drive before creating the USB flash drive. The data of the entire USB flash drive is formatted and cannot be recovered.

Step 2: Open the software and you will see the following software interface.

 

 

Step 2: insert the USB flash drive you want to create, and click "refresh" under the software. The program will automatically search for the USB flash drive in the computer.

 

 

Step 2: Click the drop-down menu button on the left of the refresh button and select a USB flash drive letter greater than the required capacity)

 

 

Step 2: select an appropriate USB flash drive and click "start to create a USB flash drive" on the right.

 

 

Step 2: A prompt box will pop up, prompting you if you have backed up the original USB flash disk data. Click "OK" to start the production.

 

 

 

The progress bar and Current Status prompt at the bottom left of the software are displayed, as shown in

 

 

After the preparation is complete, you will see a prompt box and a change in the current status. For example, the time required may vary depending on the version. The normal version takes about 1 minute, and the Professional Edition takes a little longer .)

 

 

 

Step 2: click "OK" to complete the creation. You can just unplug the USB flash drive, which will occupy about MB space according to different versions. The remaining space can still be used as the data stored on the general USB flash drive and can be formatted at will.

 

If you want to restore the space occupied by the U disk system or clear the function of the U disk boot disk, please see restoring to U disk tutorial http://www.upanboot.com/jiaocheng/huanyuan.html

If you want to update the system, download the latest version of the U disk boot master and follow the instructions in this tutorial. The Master System of the new USB flash drive will automatically overwrite the old system.