I will give you a detailed analysis of the Illustrator software to share with you the tutorial on creating realistic and delicious grape effects.
Tutorial sharing:
Step 1
Create a new document, and we will draw a grape. Use the elliptic tool (L) and create an elliptic with a blue (C = 83, M = 72, Y = 39 and K = 26), which will be the basic color of the grape.
Step 2
Now you can create a grape string by copying the first ellipse. You can press the Alt key and drag the elliptic with the mouse to easily copy the shape, and then use this tool (P) create an arbitrary contour of a grape string, which is gradually formed by filling in an elliptical shape according to three criteria: low, middle, and above. From the lower end, locate the grape along the contour of the string.
Step 3
Determines the light source. To bring more grapes, let's take: We have two light sources: direct light-this first (1), and reflected light-this second (2 ).
Step 4
Change the three-dimensional fill color of this Berry to a radial gradient. Starting from the berry located closest to the first light source, use a blue (C = 83, M = 72, Y = 39 and K = 26) to bright blue (C = 62, M = 44, Y = 27 and K = 2) radial gradient, and then use this gradient tool (G) to sort the color according to the position of the light source.
Step 5
Copy the previous step with a grape located near the second light source. The intensity of the second light source is smaller than that of the first light source, so the second gradient will be relatively dark, so it is used from blue (C = 83, M = 72, Y = 39 and K = 26) to the blue (C = 68, M = 54, Y = 33 and K = 9) radial gradient fill these grapes.
Step 6
Use the previous technique to introduce a third reflective light source and fill the grapes above with a radial gradient in the upper right corner of our image. Now the lower-layer grape in the group is named "horizontal level 1 ".
Step 7
Use the same technique to create the layer between the grape and the above.
Step 8
So far, we have achieved a lovely result. Although our image requires further editing, first let's fill these gaps with strings. Use the direct selection tool (A) to help change the shape of the string contour so that it cannot stand out of the grape. Keep selected outlines and go to objects> arrange> place at the bottom layer and fill the shape with color (C = 75, M = 74, Y = 58 and K = 76.
Step 9
Let's start with more personalized settings, move berries to make the grapes more real and symmetrical, and some berries may have to be removed or added.
Step 10
Adjust the gradient and start to process the grapes so that they do not overlap with others. Because these grapes are the closest to light and have no shadow, they will be brighter than others. Add a slider to the gradient panel as shown below. Now remove the leftmost slider again and drag the center slider to its position. Don't forget that our grapes are in A group, so use the direct selection tool (A) to select them.
Step 11
To darken grapes that overlap other berries with shadow, on the gradient panel, select the slider on the left and change its color to a darker one. Increase the value of the palette K, repeat this method for the remaining berries. This is a tough task, but I am very excited.
Step 12
Now we will create wear and scratches on these berries. Use the pen tool (P) to create a "bean-shaped candy" shape on the berry surface and fill it with white. Use the grid tool (U) to set a grid point in the center of the created shape and change the color of this point to (C = 80, M = 77, Y = 50 and K = 55 ), use the selection tool (V) to select this shape again and change the blending mode in the opacity blending mode to the front stacked bottom.
Step 13
Use the pencil tool (N) to create scratches. Adjust this tool before you start making it. Double-click the pencil icon in the toolbar. Enter the following chart to the dialog box and select the stroke color (C = 80, M = 77, Y = 50 and K = 55 ), let's start to draw scratches. The scratches are diversified by changing the stroke transparency and width.
Step 14
To give the grapes a more authentic view, add scratches and scratches on the berries.
Step 15
It is time to create some water drops on grapes. Use the elliptic tool (L) and use a linear gradient blue (C = 75, M = 62, Y = 58 and K = 8) to the dark blue (C = 80, M = 77, Y = 50 and K = 55) to create an elliptic, now fill in the white to blue with a radial gradient (C = 75, M = 62, Y = 28 and K = 8) to create another elliptic that is a little smaller than the first one. Finally, create another ellipse, which is smaller than the second one. Set this radial gradient fill, but change the center position, which is a very simple and effective method for creating water drops.
Step 16
There are no such two identical water drops. Using the techniques we have previously used to create several different water drops, you have more changes, and your images are more authentic, place these drops to lower parts of the string, which can be scaled, rotated, and changed in transparency depending on the illumination intensity, and named the current layer as "grape ".
Step 17
Create a new layer on the top of the grape layer and name it "leaf". Use the pen tool (P) to create a leaf shape, use three shades of green 1 (C = 72, M = 22, Y = 100 and K = 6), 2 (C = 68, M = 7, Y = 100 and K = 0), 3 (C = 50, M = 20, Y = 100 and K = 2) radial gradient to fill the leaves.
Step 18
Divide the leaf into several parts. As shown in the following figure, use the pen tool (P) to create five lines, select all the lines and the shape of the leaves, and split the lines by the Pathfinder, removes the leaf elements of a group and uses the gradient tool (G) To adjust the gradient fill for each segment. This operation adds a sense of realism to our images.
Step 19
Select all sections of the leaves and convert them to effect> artistic effect> sponge. In the dialog box, set the following values: paint brush size 5, definition 8, and smoothness 1.
Step 20
Create a context on the leaves, use the pen tool (P) to create the context shape, drag the shape to the paint panel, and select the art brush you just created in this dialog box.
Step 21
Now you will use the pen tool (P) to create the leaf context. Once you make these contexts, select them and click the brush you created in the previous step, this will make your line look like a stylized stroke on the leaves, select the context and turn it to the object> extend the appearance. Still use this selected context, click add from the path finder, and then press the difference set to use four different shades of color 1? Brown (C = 25, M = 68, Y = 100 and K = 13), 2? Green (C = 41, M = 23, Y = 100 and K = 2) 3? Green (C = 35, M = 20, Y = 94 and K = 1), 4? Green (C = 37, M = 21, Y = 97 and K = 2). Fill in this context.
Step 22
Use a different shade of three colors 1 (C = 54, M = 50, Y = 65 and K = 27, 2 (C = 50, M = 35, Y = 65 and K = 10), 3 (C = 49, M = 15, Y = 100 and K = 1) of the light gradient to create a leaf shape, use the pen tool (P) to create a stem between the leaves and branches and fill it with the same gradient as the leaf context.
Step 23
Add the vein of the leaf, use the pen tool (P) and create the reflection and shadow on the leaf vein, and use the following linear gradient color reflection: 1? (C = 23, M = 15, Y = 87 and K = 0) 2? (C = 27, M = 17, Y = 89 and K = 0); shadow of a light gradient: 1? (C = 36, M = 30, Y = 95 and K = 4), 2? (C = 42, M = 43, Y = 96 and K = 15), 3? (C = 29, M = 20, Y = 90 and K = 0 ).
Step 24
Use the pen tool (P) to create a grape scroll and create a curve without filling. It doesn't matter if the stroke color is in this phase.
Step 25
Create a new art paint brush, create a shape similar to the following display shape, drag it to the paint brush panel, apply the paint brush to the line already created in step 24, keep this volume selected, go to the object> protective display appearance, and then to the object> path> clean. With seven different shades of light gradient color: 1? (C = 50, M = 20, Y = 100 and K = 2), 2? (C = 25, M = 68, Y = 99 and K = 13) 3? (C = 41, M = 23, Y = 100 and K = 2), 4? (C = 23, M = 15, Y = 87 and K = 0), 5? (C = 35, M = 20, Y = 94 and K = 1), 6? (C = 27, M = 17, Y = 89 and K = 0), 7? (C = 38, M = 21, Y = 97 and K = 1). Fill in this shape.
Step 26
Use the tip and gradient description in step 23 to create the dimension (dimensions: length, width, height, volume, etc.) of the grape request ).
Conclusion
You are about to complete your image and add a flexible gradient to the background. The key to making a real image is to pay close attention to the details. People's eyes are good at capturing what looks incorrect. If your image is not as real as it may be, try to find some reference images and add (or even subtract) some details. Provide the best wishes.
All right, the above information is a small series of tutorials for the users of this software of Illustrator to illustrate and share the details of creating realistic and delicious grape effects, you can see the users here. I believe that the method is very clear, then everyone will follow the small series of tutorials to try to draw realistic and delicious grapes.
