tutorial on the use of PM partitioning software

To increase the capacity of C disk is often encountered in such cases, such as my computer hard drive now has four partitions, namely C, D, E, F, I want to increase the capacity of C disk 10GB, and D and E disk space is very limited, can not allocate 10GB capacity to C disk, only F disk has ample capacity can give C disk 10GB capacity, How do you do it? In fact directly with the volume of the F disk is not possible to divide, must be first from the F disk to divide the 10GB to e disk, then divide from E disk 10GB to the D disk, finally from D Disk Division 10GB to the C disk. Below is a detailed description of how to do this (please back up important documents before operation):

1, double hit open PM partition software.

2, the following image is open PM partition software main interface.

3, first from the F Disk Division 10GB space to E disk, select the F disk after the right button menu. Select resize/Move options.

4, open resize/mobile interface

5, the Division of free space, attention must be in the F disk before the free space, otherwise, can not be merged with D-Disk. Can fill in the box directly in the number, divided into 10GB of free space corresponding to 10276MB, here is a formula:

Integer GB Calculation formula: (X-1) *4+1024*x=y

(Note: The above "*" means "X", hereinafter)

where x is the value of the integer partition you want to get, the unit is Gb,y is the number you should enter when you partition, in MB, for example, I want to get 3GB integer space under Windows, then I should input (3-1) *4+1024*3= 3080, then we should enter the partition when 3080 as the size of the partition, the same reason to 10G space should be (10-1) *4+1024*10=10276, input 10276 will get 10G of the integer space, the other size you can calculate! Enter 10276 to determine the point.

6, the following figure more than a 10GB logical free partition

7, select the free section to open the Right button menu, select "Create" a new partition.

8, point to determine the format of the new partition

9. Depending on the type of disk you want to merge, the E disk is the NTFS type, so you must select the NTFS system type and click OK.

10. Generate a new 10GB logical disk

11, select e disk and then open the right button menu, select "Modify"-"merge to ...".

12, the 10GB disk and e-disk merge, see the following figure

13, after the merger of e-disk more than 10GB space

14, from the F disk has been successfully divided into 10GB space to E disk, and then the same method from E disk partition 10GB space to D disk, the specific operation I do not introduce, can be operated on the appeal method. The following is a description of how to divide 10GB space from D disk to C disk.

15, the first to the new division of a logical partition into the primary partition, otherwise it can not be merged with the C disk, select the new partition out of the 10GB logical partition, open the right menu, select "Modify"-"set the primary partition."

16 The image below shows a 10GB primary partition.

17, the C disk and the new 10GB primary partition merged, select C disk, open the right button menu. Select "Modify"--"merge to ...".

18. Click OK, combine C disk with new 10GB partition.

19, the following figure C disk more than 10GB space.

20, the operation has also a key step, is the point of application, click on the application after you slowly wait, time will be very long, specific how long it takes, depending on your operation steps, such as the appeal of course will be very slow, about half an hour. If you want to undo the previous step, you can point to "undo", if you want to undo all operations, you can point to "undo all".

21, the following image is the point "application" after the partition merge interface. Wait for the partition to complete.