Tutorials on Driving Test Subject 2

Tutorials on Driving Test Subject 2

After passing the driving test subject 2, Xiao Bian deeply felt that the current electronic invigilation is more focused on practical capabilities, and there is no manual invigilation of personality issues,
For students who practice cars practically, it is a rare good thing. Subject 2 is also called the 5th exam after the new regulations,
It can be divided into inverted database, fixed point on the ramp, lateral parking, right angle corner, and curve driving. How to smoothly pass through Subject 2, in addition to diligence and practice,
Driving skills are also very important. In this article, we will explain some experiences in warehouse reversing, hoping to help you.

1. Open driving test baby, click "Learn" and then click "inner road exercise" to go to the main interface
First, let's make some simple settings and click "Settings" to set the object skin to transparent skin.
Click "cancel correction" in "adjust the steering wheel" to set it. Of course, you can set it based on your preferences.

2. Press the "S" key and the car will start to fall backwards. When the left-side mirror starts to overlap with the yellow line, the right side will be exhausted.

3. When the vehicle body and the database are diagonal, return to 90 degrees.

4. Maintain the distance between the vehicle body and the database side by correcting the steering wheel.

5. Return to the square direction and stop the car at the right position

6. Press the "w" key to drive the car out. When the car is in contact with the yellow line above, the car goes to the left.
7. Then, the following practices will be similar to those mentioned above and will not be repeated.

Question 1. Why do we choose to strike the right direction when the left-side sight starts to overlap with the yellow line?
Many students may say that the height of a person is different from that of a person...
Yes, this point is different. The choice of this point is about the wheel pressure on the yellow line, so you can adjust it when you train the car.
You can also slow down the speed and feel the vibration of the car's yellow line.

Question 2. About how to correct the car body to make it into the database.
By, you can probably ensure that your car is accessible to the database,
You can adjust the relationship between the vehicle body and the database.
The vehicle body can be securely stored into the database.

Question 3. Car blind zone.
We sat around in the car with blind spots, about 4 meters in front of the car, about 10 meters behind the car, about 1.2 meters left of the car, about 2.3 meters right of the car,
With these approximate estimates, we can know where the car is located.

Question 4. Internal and external wheel differences
The trajectory of the revolver is about 0.9 different from that of the Right wheel. That is to say, when we turn right, the left front wheel must be about one meter away from the driveway to pass safely.

Question 5: How to implement more accurate inverted database
The vehicle's running track is mainly determined by the wheel. By observing the relationship between the length of the database side and the wheel track, we can more accurately reverse the car into the database.
In the reversing warehouse, the steering wheel should be adjusted based on the running track (by looking at two inverted mirrors.

 

Tutorials on Driving Test Subject 2