Two Methods for Windows 7 ADSL Network Connection (1)

Currently, Windows 7 is widely used. Do you know its ADSL Network connection settings? Here we will summarize the methods for connecting to the Windows 7 ADSL Network. I hope my friends who are not clear about this can get help.

I. How to set up the Windows 7 ADSL Network Connection.

Many home users and small-sized commercial users use ADSL to access the Internet. Therefore, I would like to provide a special description:

1. The connection model is computer-router-adsl modem lan connection settings

A. On the Control Panel-network and sharing center, set the current network type and select work network ), if the IP address is not special, you do not need to set the company office. Generally, you can consider assigning an IP address to consider sharing), the router will automatically assign the computer a runtime IP address, which is generally an intranet address ). Such as the middle part of 1 ):

B. Configure the automatic dialing function for the vroadsl

The vro configuration for Windows 7 ADSL Network Connection is as follows: power on the vro and enter the IP address of the vro in the browser. Generally, the IP address of the vro192.168.is 192.168.1.1. You can enter ipconfig in CMD to view the IP address of the Gateway ), enter the login account and password of the vro. Generally, the management interface of most residential or small-sized commercial routers is similar to 2:

For the TP-LINK R402 management interface, you can in the network parameters-WAN port settings, enter the Internet account and password telecommunications or Netcom for your installation left for you ), select Automatic Connection under, so that every time the router and ADSLMODEM are powered on, it will automatically control the ADSL login network, without manual intervention. Other vro settings are similar.

C. After the configuration is complete, you only need to confirm whether the vro can connect to the network normally. In the early Windows XP, you still need to create a network connection every time, it seems that windows 7 is also saved. By default, all tasks are completed by the operating system.

2. Connection Model Computer-the dialing setting method for the computer connected to the Windows 7 ADSL Network.

If you do not have a vro, You need to configure PPOE dialing on Windows 7 as follows:

A. in Figure 1, change the network settings and click set new connection or network. Then select the first item "connect to Internet" 3)

The following interface is displayed because the machine has been connected to the network. 4 ):

Choose "still set new connection", 5 ):

Select broadband PPOE connection 6 ):

Enter the Internet connection account and password for Windows 7 ADSL. By the way, many laptops are equipped with wireless and wired NICs. For example, if you use wireless NICs, you can set wireless W here to switch to the wireless network. The configuration method is similar.