Two methods to solve network cable computer failures

In many cases, after the computer is connected to the LAN interface of the D-LINK router through the network cable, the local connection will show unable to connect, the specific solution is as follows:
1. Set the NIC speed to 10 MB. Click Control Panel → network connection → local connection → right-click Properties. In the Properties dialog box for local connection, click Configuration → advanced, force the NIC speed to 10 MB full duplex.

2. If the physical connection is not properly connected, check whether there is a problem with the network cable. You can change the network cable to see if it is normal.
The above is the use of D-LINK router two connection solutions, everyone understands it, hope to help you. This article is from