Two solutions for wireless route connection settings

In the construction of a wireless network, wireless route connection settings are a key point. If the settings are incorrect, frequent faults may occur, and security is not guaranteed. Let's take a look at the wireless route connection settings. The specific operation steps have been summarized for everyone.

Wireless route connection setup Part 1: physical connection

1. connection between a wireless router and a superior device:

1. When the upper-level device is an ADSL digital cat, the output port of the ADSL modem is connected to the WAN port of the wireless router with an Rj45 dual-head network cable;

2. The original network is connected by residential broadband or twisted pair wires. There are two cases: a is a standard case and there is a network cable terminal box on the wall, connect the jack on the box to the WAN port of the wireless router with an Rj45 dual-head network cable. The technician of the B network company pulls the twisted pair into your home without connecting the terminals on the wall, only one Rj45 crystal head is pressed on the online head. In this case, just insert the Rj45 header into the WAN port of the wireless router;

2. Wired connection between the wireless router and the desktop: The Rj45 dual-headed network cable is still used. One End connects to one of the four LAN ports of the wireless router and the other end connects to the PCI wired network card behind the desktop;

3. wireless connection between a wireless router and a laptop (or a desktop computer): first install the driver of the wireless network card of the current (or desktop), so that the system can identify and display the wireless network card, in this tutorial, you also need to enable the wireless network adapter, and set the Internet Protocol (TCP/IP) in the "properties" of the wireless network adapter to "automatically obtain IP addresses" and "automatically obtain DNS server addresses ", double-click the red-cross laptop icon in the taskbar in the lower-right corner of the desktop to go to the "wireless network connection status" window, and click "view wireless network" below to go to the next "wireless network connection" window, click the "Refresh Network List" button in the upper left corner to search for your wireless route signal. After receiving the signal, click it and click "Connect.

Wireless route connection settings Part 2: network connection and other router settings

On any computer that completed the first connection, open IE, enter the default address of the wireless router in the address bar, and press enter to go to wireless route management (the default address is generally 192.168.1.1, the management address of each brand of wireless router can be found in the Manual ).

1. In the ADSL dialing method, select "use PPPoE client function" in "WAN Settings", and enter the user name and password left by your network supplier in "User Name" and "password, select automatic dialing, and click OK and save. This is a one-time operation. After the wireless router is started, it will automatically dial up for access.

2. for residential broadband that does not require dial-up and authentication, select "automatically obtain IP address from DHCP server" in "WAN Settings;

3. If the network supplier specifies a fixed IP address for you, select to manually set the IP address in "WAN Settings;

4. DHCP must be enabled in the LAN settings of your wireless router so that IP addresses can be automatically assigned to your desktop and laptop, your desktop and local "automatically get IP Address" and "automatically get DNS server address" depend on this pair.

5. If you do not want your neighbors to connect to your wireless router, share the wireless network with you, and squeeze your bandwidth, you should add a password in "Wireless Security Settings, enter the same password when connecting your own desktop and laptop. You can only verify the password once.

6. If you do not want to set a password for the wireless router connection, you can also use the Mac address filtering method to enable this in the "Mac access" of the wireless router, then, log on to the Mac address list of your desktop and laptop wireless network card, and your devices can be connected smoothly, other people's unregistered devices cannot connect to your wireless network.