Two TP-Link Wireless routes are successfully established in WDS and bridge modes!

Networking objective: to achieve full coverage of wireless signals in three rooms and two halls!

Condition: China Telecom ADSL (Telephone Dialing), one TP-WR840N supports WDS, And the other TP-WR340G + supports bridge.

Networking process: TP-WR840N wireless routing as the main router (A), TP-WR340G + as ap (B ). Start with the commentary. PS: It's actually a simple configuration problem, but I searched Baidu for almost an hour and didn't see anyone telling me the correct configuration method! That's why there is no technical content in this article.Article. Purely experience!

B wireless route settings:

On the B route logon page, set "Network Parameters"-"LAN port settings"-"ip address" to the address different from route A, for example, 192.168.1.2 ), go to "DHCP server" and select "do not enable DHCP server". Then go to "Wireless Parameters, basic settings", modify the channel to 12, and enable "wireless function, the most important step to enable SSID broadcasting is to check whether the "enable bridge" option is available! In fact, this option is not checked. Go to "Enable Security Settings" and check, security type is WPA-PSK/WPA2-PSK, security options are WPA2-PSK, encryption method is AEs, the password enters as prompted. At this point, Route B settings are complete!

A wireless route settings:

B. After route A is set, restart the route!