There are many people with U disk installation of the original XP system, the installation after the reboot system, prompted NTLDR is missing press the any key to restart error. Then it just stops there and can't get into the system. What is the reason for this? Clearly already installed the system, but not into? In fact, the key step in the installation is mistaken. Now let's take a look at how to properly install the original XP bar.
First, place Windows XP system mirroring on a local disk (non-system disk, such as e-disk)
Second, insert U disk.
Third, open the UltraISO, open the WinPE mirror, click Start-Write the hard disk image
Third, the choice of U disk, click to start (before the start of the best format a U disk)
Five, after burning, click Off, restart the computer (to ensure that the default boot mode for the U disk to start, if not, you can restart the computer when the manual adjustment)
Vi. access to WinPE micro-systems.
Seven, WinPE start, you must remember to pull out the U disk, if you do not pull out the direct installation of the U disk, you will be prompted to NTLDR missing (i estimate is because U disk and our system disk (such as C disk), are active partitions, if you do not pull out the USB disk directly installed system, The file will be copied in error, so in the beginning, I put the system mirror on the local disk (this is the legendary key step).
Eight, next, will be the system mirroring, with virtual optical drive software mount (generally in the WinPE system control Panel has, even if the U disk has exited, also does not affect the use)
Nine, the installation process will not repeat.
When installed, the NTLDR is missing press any key to restart error will not appear.