U disk winpe, CD-ROM WinPE system installation and graphics tutorial

WinPE is the abbreviation for Windows Preinstallation Environment (Windows Preinstallation Environment), a Linux personal version of the kernel that runs in protected mode, and is understood as a mini XP system, Almost commonly used basic function mini XP All can realize, many friends have contacted or used, the online tutorial also many, this article mainly writes to the contact WinPE later friend reference, how to make own WinPE system to start the repair Disk (U disk and CD-ROM).

The current online version of the WinPE has two main: the Remote mountain Red WinPE Toolbox and Old Peaches WinPE modified version, the latest version is V32 and V0911 respectively.

I recommend using the modified version of old Peaches, because this version is the cleanest, because for many friends, use WinPE more is maintenance computer, install operating system uses, so as long as can enter WinPE system, most repair operation can complete. And the mountains of red leaves WinPE is integrated a lot of shortcuts (including security, network, etc.), the actual use of these tools should not be too high. If it is burned into the form of CD-ROM, it is recommended to use the mountains red leaves seems better, if it is a U disk WinPE system, or with a clean WinPE seems a little better. OK, this article on the U disk's WINPE (old Peaches) and CD-ROM WINPE (mountain red leaves) as an example of the production of WINPE system process (of course, can also be made into a hard disk, that with the installation of an operating system almost no difference is not discussed).

A, U disk WinPE production graphics and text tutorial

1, download the old Peaches WinPE modified version, load the virtual CD-ROM drive, and then the right button play or directly run the root directory setup below the PESETUP.EXE, will pop up the following figure:

Choose to install the target object, of which 123 are hard disk installation, for ordinary users rarely need, here we do u disk WinPE, so first insert U disk (please note that you must first back up the data on the U disk), so select 4 and then enter.

2, this time you will be prompted to the disk of your U disk (the sky edge of the U disk Letter is G), and then in the following example, enter the tip of the U disk letter. Carriage return confirmation, as shown below.

3, this time the installation program needs to format the U disk and write the Guide information, press any key to start, the following figure.

4, here for your U disk Select File System (General selection FAT32 compatibility better) and volume label (The sky Edge Input is BOOTXP), and then point "Start", the following figure.

5, Confirm U disk data has been backed up, click "Yes" after the U disk will be formatted. We click "Yes" to begin formatting, as shown in the following figure:

6, the format of the U disk after the pop-up image report, click "OK".

7, pop-up The following window prompts need to write grub (days margin Note: Grub for a bootstrapper) to the U disk boot area, where special attention should be paid to the choice of disks list box, do not choose the wrong, where the number HD0, HD1 is according to the Linux custom named, The capacity in parentheses is the easiest to determine whether the disk will be written. If you do not modify the Click List box. The following nuclear selection box, you can choose according to need, if it is the first time to do U disk System or do not understand do not choose, and then click "Install."

Note : More attention to the computer Tutorials section, triple Computer office group: 189034526 welcome you to join