U Disk installation System! It's quick and easy.

As long as: a U disk, a ghost version of the system (if you have a CD-ROM system on hand, you can also put the information on the CD-ROM first through the other computer copy to the Startup disk). You can: 1,u tray system. 2,u disk Restore System. 3,u Disk Rescue System information. U disk can also be used for mobile storage ... There's no more discs. Steps (part of the information from the universal Internet, music sharing!) : Download "one key u Disk" System Tools to make a startup disk----into the system ghost files or installation files----Reset set U disk first start----PE operating system 1, download "One key u Disk" System Tools to create a startup disk download address: http://www.upanok.com/ onekey/100.html download to the computer, installed in the U disk. And according to the instructions shown step-by-Step production of U disk boot disk. (Note that the production of the startup disk will cover all U disk data, please back up the U disk in advance). 2, put the system ghost files or installation files if there is a system CD-ROM, please copy the CD folder. If you do not have a system, please download the system, the system download address: http://www.upanok.com/ghostxp/(only for testing purposes, the proposed purchase of genuine CD-ROM). Copy the file of the ghost file or installation system to the USB drive. From then on, the U disk can move the installation system, restore the system. 3, Reset set U disk first start common two kinds of setting method: The first: Start the hot key directly into the U disk system, speed Check table: http://www.upanok.com/jiaocheng/60.html The second: The boot set bios, into the U disk System, Quick Check table: http://www.upanok.com/jiaocheng/68.html put "USB-HDD" on the front. 4, reboot into the system, you can operate in the PE of U disk. To see this interface, select the first item. Enter the U disk PE.

If your laptop has a blue screen when you start PE, check to see why the hard drive works, and if it's AHCI mode, you can turn it into IDE mode. After the exchange can again try to enter the PE. When you enter PE, the following interfaces appear:

In My computer, you can copy the files from each disk of the original computer back up. Select a key restore to restore the ghost system files that you have backed up or the files you want to install to the system disk. Select the virtual optical drive, you can copy from the CD-ROM installation file open, the system into the system disk. After the system is installed, the necessary drive is put on the U disk, you can continue to install all the necessary computer drivers. At this point, with a key U disk installed operating system completed! You can forget the trouble of not having an optical drive to install the operating system. It is worth mentioning that, because the whole process is to read the data on the hard disk, so the installation speed than the CD-ROM installation much faster. Now, do you still want to have a heavy, small size CD-ROM drive? Throw away a little burden. Modified connection to the hard drive can increase capacity. The battery can increase the endurance. Optical drive, was eliminated ~u plate, is kingly!