U-Hero U-disk making tools how to use

u Hero Mounting system Installation Preparation

1. Download U-hero to launch the latest version of the production tools to the computer. (It is recommended to download to the computer desktop, easy to find!)

2. Before running the installation program, please close the anti-virus software and security software, the software involves the read and write operation of removable disk, some of the soft false alarms may lead to the production failure!

After the download is complete, a direct double-click on the Windows XP system will run, and the Windows Vista or WINDOWS7/8 system can be run as Administrator by right-clicking.

Steps to make a startup USB drive

Default Mode 1.1: Open the main program, insert USB/SD card and other removable devices, in the disk list will automatically list the current computer all the removable disk drive letter, model, capacity and other information.

Default mode 1.2: Select the removable disk you want to make bootable, boot mode usb-hdd or Usb-zip optional, USB-HDD mode is used by default. (CHS mode is mainly for some undetectable bios, generally do not need to check this!) if you want to convert the remainder of the USB flash drive to NTFS, you can check the NTFS option, note: Formatting NTFS will affect the use of the USB flash drive function, unless you need to store more than 4G of single file, It is not recommended to check this option!)

Default mode 1.3: As far as possible to quit antivirus software and security class software to avoid the production failure, click on a button to make the buttons "one click to make a USB Startup Disk", the program will prompt whether to continue to confirm that the selected USB flash drive No important data after the point is the start of production.

(Note: Using a previous version of the USB flash drive if the production failed, please try to perform the initial USB drive before making.) )

Default mode 1.4: The production process is different depending on the computer configuration and the different time of the USB stick chip, please wait patiently. After making the correct setting of the computer BIOS (set the method please refer to the setting up USB stick Boot tutorial) can be launched from the USB stick. In order to verify that the USB flash drive is successful, you can run the analog boot.

Note: Analog start-up is only for the test drive to be successful, and cannot be used to test internal DOS and PE systems.

At this point, a perfect U disk Startup disk is finished, and then you can use this good USB stick to install any Windows system you want to install.