U-Speed USB u disk making tool Use tutorial

　　The first step: First you need to have a minimum of 512M size of u disk and a computer, ordinary computer can! u disk and the computer are ready, you can at the U-speed website Download our u disk Startup Disk production tools. Download steps to omit, I believe this everyone than I am still familiar with it!

　　The second step: after downloading the U disk installation System tools as shown in the following figure:

　　The third step: will be downloaded after the compression package for decompression, right-click on the file, select Extract to the current folder, as shown in the following image:

The folders after the decompression are shown in the following illustration:

　　The Fourth step: We open decompression after the U-Speed Disk launch disk Production tool, we will see inside a "U-Speed USB u disk start production system." This file, as shown in the figure:

At this time we want to make into a U disk Startup disk disk inserted into the computer, special attention, in your production of U disk Startup disk, please put all the data on your U disk backup. We double-click "U-speed U disk start production system." Open it, the next step is to install U-speed to carry out your U disk Interface! We will see the following production interface:

We choose the U disk to choose our U disk, if your computer has only a U disk, then do not pay attention to the default can be directly, when we click on a key to make USB boot disk. Again, before you make your U-speed u disk Startup disk, you will be a U disk inside all the data for backup, or the next operation will be on your U disk format, if you do not back up your data, then you will lose the information inside the U disk, you can not find it back. So be careful before you do the operation. As shown in the picture, will also pop up the corresponding hint that the production of U disk Boot disk will be your U disk format.

After we've made a point, we'll start making the U disk boot disk, and then we'll see the percent of the installation on the progress bar, as shown in the following figure:

To remind you that, in the production, when the progress to 55%, may be slower, we only need to wait patiently, the following figure:

When the progress reached 100%, the U disk Boot disk production is completed, after the completion of the following prompts:

When you are done, you will be prompted to make the USB boot disk operation successful. Thank you for using U-Speed Disk launch disk production system, such as U disk Startup disk successfully mounted on the U disk, is actually loaded PE system installed your system, then you can use the PE system to restore the system, repair system, hard disk partition repair operations.

So how to start a U disk in the PE system to repair the system? When you restart the computer, choose to use U disk to start, and then enter the U disk PE system can be. Because of each motherboard, a variety of brands of computer options to start using U disk is not the same way, so here can not give you a detailed introduction, some computers in the restart, the first screen press ESC key to choose U disk, optical drive, hard drive, etc., you can also enter the BIOS to set up, The specific setting method can check the computer that you use or the motherboard to choose the method that the USB disk starts on the Internet. No more introductions here!