U-Warrior Disk Launch disk production tutorial

Default Mode 1.1: Open the main program, insert U disk/SD card and other removable devices, in the disk list will automatically list the current computer all the removable disk, model, capacity and other information.

Default mode 1.2: Select the removable disk you want to make, boot mode usb-hdd or Usb-zip optional, default to USB-HDD mode. (CHS mode is mainly for some of the BIOS can not be detected, generally do not need to check this!) if you want to turn the rest of the U disk into an NTFS format, you can check the NTFS option, note: Formatting to NTFS will affect the use of the USB disk startup function, unless you need to store more than 4G of single files, Otherwise it is not recommended to check this option!)

Default mode 1.3: As far as possible exit antivirus software and security software to avoid production failure, click a button to make

, the program prompts whether to continue to confirm that the selected U disk has no important data after the point is to start production.

(Note: The use of the previous version of the U disk if the production failure, please try to perform the initialization of the U disk before making.) )

Default mode 1.4: The production process according to the Computer Configuration and U disk chip different length of time is also different, please wait patiently. After the completion of the production of the correct computer BIOS (set up the method, please refer to set up a U disk boot tutorial) can be started from U disk. In order to verify the success of the U disk start-up, you can run the simulation boot.

Note: The simulation boot is only for testing USB disk boot whether the production success, can not be used to test internal DOS and PE system.