Ubuntu10.04 ruijie online

Our school uses ruijie certification to access the Internet. When we mentioned ruijie, it gave me a headache. When I installed the vmvm on windows, I was prompted that multiple NICs were not supported and frequent disconnection occurred, in one breath, I searched for information on the Internet and tried to crack him. Finally, I didn't play very well. Now, switching to Linux does not stop users. I have installed several versions, either not connected, or frequently dropped lines when connected. Finally, I was idle and made up my mind to completely solve this problem. google found that many Linux enthusiasts are using ment.

Our school uses ruijie certification to access the Internet. When we mentioned ruijie, it gave me a headache. When I installed the vmvm on windows, I was prompted that multiple NICs were not supported and frequent disconnection occurred, in one breath, I searched for information on the Internet and tried to crack him. Finally, I didn't play very well. Now, switching to Linux does not stop users. I have installed several versions, either not connected, or frequently dropped lines when connected.

Finally, I was idle and made up my mind to completely solve this problem. google found that many Linux enthusiasts are using mentohust for ruijie certification, I also tried to install the latest deb package and configure it .. It's really a good thing. After the connection, I found it never went off. It's very stable, nice!

Now I will share my experience with my friends who have problems with Linux + ruijie certification:

1. Configure the Ubuntu 10.04 network first: System-preference-network connection, and configure IP, mask, gateway, and dns.
2. download the latest version or corresponding version of mentohust: http://code.google.com/p/mentohust/and install it.
3. if you are a windows + linux dual-system and have already installed ruijie on windows, go to the directory where ruijie is located (if you are not a dual-system, copy W32N55 on the windows host where ruijie is installed first. dll and 8021x.exe to the local machine), open bash and input:
Sudo mkdir/etc/mentohust
Sudo cp W32N55. dll/etc/mentohust
Sudo cp 8021x.exe/etc/mentohust
Sudo mentohust // configure mentohust

Welcome to MentoHUST version 0.3.4.
Copyright (C) 2009-2010 HustMoon Studio
People are in the Chinese mainland, sweet and spicy. Mingde is an innovator.
Bug report to http://code.google.com/p/mentohust/issues/list

** Nic [1]: eth0
** Nic [2]: wlan0
** Nic [3]: usbmon1
** Nic [4]: usbmon2
** Nic [5]: usbmon3
** Nic [6]: usbmon4
** Nic [7]: usbmon5
** Nic [8]: usbmon6
** Nic [9]: usbmon7
** Nic [10]: usbmon8
?? Select Nic [1-12]: 1
** You have selected the [1] Nic.
?? Enter the User name :****
?? Enter the password :****
?? Select the multicast address (0 standard 1 ruijie private 2 Xaar): 1
?? Select DHCP mode (0 does not use 1 second authentication 2 before 3 after authentication): 0 // set according to the actual situation
** User Name:
** NIC: eth0
** Authentication Timeout: 8 seconds
** Heartbeat interval: 30 seconds
** Failed wait: 15 seconds
** Failed: 8 times
** Multicast address: ruijie
** DHCP mode: not used
** Notification Timeout: 5 seconds
** Local MAC:
** IP Address used :****
** Subnet mask :****
** After the authentication parameter is successfully saved to/etc/mentohust. conf. //, you can open this file to modify the parameter.
> Find the server...
** Verify MAC :****
> Sending username...
> Send password...
** Client Version :****
** MD5 seed :****
** V2 verification value :****
** V3 verification value :****
> Authentication successful!

So OK ..