Ubuntu13.04 set static IP addresses (regardless of laptops, desktops, and virtual machines)

Operating system: Ubuntu1304Author: Sunday article address: http: blogcsdnnetsu

# Operating system: Ubuntu13.04

#

# Author: Sunny

# Article address: http://blog.csdn.net/sunnypotter/article/details/22598201

# Set static IP addresses:

#

# Preparation:

#1. view the network card, IP address, and subnet mask netmask in use. my name is eth0.

Ifconfig

Eth0 Link encap: Ethernet HWaddr ec: 9a: 74: 36: c8: 8c

Inet addr: 192.168.1.100 Bcast: 192.168.1.255 Mask: 255.255.255.0

# IP: 192.168.1.100, netmask: 255.255.255.0

#2. View gateway

Route-n

Destination Gateway Genmask Flags Metric Ref Use Iface

0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

# Gateway: 192.168.1.1

# Dns: 192.168.1.1 # generally, it works with Gateways. of course, you can also set other dns

#3. set static IP now

Sudo vim/etc/network/interfaces

*********

# Interfaces (5) file used by ifup (8) and ifdown (8)

Auto lo

Iface lo inet loopback

# Set Static IP

Auto eth0 # My network card

Iface eth0 inet static # static, relative to dynamic (dhcp, that is, iface eth0 inet dhcp)

Address 192.168.1.100 # you can set available ip addresses in the same network segment, for example, 192.168.1.102

Gateway 192.168.1.1 # gateway

Netmask 255.255.255.0 # subnet mask

Dns-nameservers 192.168.1.1 # you can set multiple dns addresses or do not set them here. edit/etc/resolv. conf
Dns-nameservers 114.114.114.114

#4. restart the NIC

Sudo service networking restart

# Or sudo/etc/init. d/networking restart

# If the problem persists, restart reboot.

# Note:

# When dns-nameservers is not set, manually add it in/etc/resolv. conf

Sudo vim/etc/resolv. cof

Nameserver 192.168.1.1

# In addition:

In earlier versions, you need to set resolv under/etc. conf file, and add nameserver to connect to the internet. Otherwise, you can only access it through ip addresses and cannot parse the URL. (nslookup can view the ip address of the website. of course, you must first have dns ).

This method is no longer recommended after Ubuntu12.04, because no matter what value you want to set in the configuration file, it will be restored to the initial state after restart. (Of course, it does not include the automatic setting of the boot script)

We recommend that you directly add dns-nameservers to the interfaces configuration file. <网关ip> This line.