Unable to log on to wireless router configuration interface resolution

Describes how to set up a home wireless local area network articles, you can search out a lot of online, these articles look very good, not only the details of the process described with the relevant pictures. Because of professional reasons, although I used to pay attention to the wireless router configuration in this respect, but because there is no actual operation and flow on the surface, the last few days can not resist the temptation to do a set of Netgear (the United States Network) of the wireless set, personally modified the local area network. This thought with a few years of it career, should be extremely easy things, unexpectedly but after several twists and turns, the following experience and lessons to share with you.

Wireless router is Netgear WGR614 (54M is 802.11g), network card is also 54M (configuration is very smooth so did not look at specific models), the reason for choosing Netgear, because I am a so-called professional friend said, " Netgear is the best except Cisco-linksys, but Linksys is too expensive. ”

First installed in the Notebook wireless network card, the installation of a little worried, because XP said NIC driver "without Microsoft certification, there may be problems", but I immediately installed the Netgear CD-ROM network adapter configuration software, all normal, After the boot, I found the AP of the office. According to the network management to my password, always can not connect, this thought is the problem of the password, network management has repeatedly guaranteed no problem, it can only be the problem of network adapter configuration, so depressed for an afternoon. Quickly off work when Ping the company's wireless router, found that there is no way, immediately with the network management to restart, after the smooth connection. A little lesson from it, nothing to do with the problem.

Back home, ready to start rebuilding the home network. The home is a monthly ADSL internet connection, through a 8-port mini switch composed of a total of 3 PCs in each house LAN. Prior to the ADSL set to automatic dialing, the purpose is to facilitate the home several machines at the same time online, the result was netcom reset my internet password, said is not allowed to do so, had to change to the manual dialing,$#$@%$&. Listen to colleagues said, through the wireless router automatic dialing, connect the machine can also be connected to the Internet, and Netcom also can't find, and then discard the original switch, the machine has received the wireless router port. According to the instructions to connect the wireless router and ADSL cat, at this time the first doubt, the former ADSL cat and switch uplink mouth with the intersection line connection, now still use the crossover line? Simply use the wireless router itself with the line.

After the connection, insert the wireless router's drive disc, prompted to find an Internet connection, and then read the manual, said, "to ensure that there is an available Internet connection", do not understand what "available" means, and then follow the previous switch mode, With the PC dialing on the ADSL, the wireless router connected to the switch on a port. Here is a major mistake, completely belong to the time of phlegm-obsessed, chaotic. Unexpectedly passed the driver's Internet connection test, and then prompted to select the device connection, found that is not the right (this is the consequences of the chaos), simply try each, found all go down, installation failed again. So want to adopt the way of manual setting, the result found that the login address given is "http://www.louterlogin.net", at that time was confused, do you want to surf the internet first? can go through without line by Internet, I also deserve you what?! However, after a trial, found that whether or not to dial up, the display is "This page cannot be displayed."

The next day, in the company to the professional to call the consultation, he said that the login interface should be "192.168.1.1", I said that the manual is not so written Ah, and I have tried, but in the direct even when the ADSL cat can log into the cat configuration interface, other situations can not log in. He advised me not to even the cat, only to try the wireless router, and said that if it is not resolved may be compatible with the issue, to change the router. Hung up the phone, I secretly scold a sentence, "This what expert!" What can I do for you? "(but it turned out that the experts were right, I wronged the people, sorry AH) I still do not give up, and search related articles on the Internet, found that most of them are logged after what those options are doing, how to match, involving how to login configuration interface is very few, and occasionally talked about is basically a sentence" Input 192.168.1.1 Login "Took, is not everyone log in when all very smooth ah?" In fact, I think that the specific configuration of the explanation is not very useful, because the basic use of the default settings on it, a lot of articles themselves are said.

Go home at night and try again. First think of the cat set to Automatic dialing, and then even the wireless router, login to the cat's configuration interface suddenly thought, this address is also "192.168.1.1", will not and the router that conflict? (The idea is a little "white") so hard to change the address of the cat, but eventually failed. Use PC to connect the cat, dial the Internet, and start frantically searching ... Inadvertently found a post, the original text is as follows:

Installation of Netgear! Everyone knows that the instruction manual is all in English, and that CD is useless! So if you have no experienced friends set up will be more trouble! And seems to follow the online download instructions set is wrong! Let me tell you how I set up!

Patrt1: Connection method

Disconnect the modem from the PC and connect the router to the PC (do not connect to the Internet first)

When the connection is good, open IE browser, address bar input: 192.168.1.1.

At this time will appear a welcome interface, my English, click OK, a few seconds will appear a hint, let you connect to the internet! This time you will be able to connect the ADSL cat and the router! Just a little bit more sure! (See photo)

Then you can set it up! The setting inside should be quite simple, the region chooses Asia,ssid name default is Netgear, you also can own change! There is also a need to fill in your ADSL Internet account and password!

Once you've set it up, you'll be able to wireless your unlimited!

According to my groping, feel that there are a few points to note:

First, do not connect the Internet, or may appear 196.168.1.1 can not be opened, to wait for welcome interface after the advent of the prompts to reconnect internet!

Second, to remember not, restart the computer, open the ADSL cat, router power unplugged and then connected. and reset your router!. Note Local connection to choose to automatically obtain IP address!

Great inspiration, and think that experts have mentioned this method, immediately try ... Success! Login Configuration Interface, configure the parameters (in fact, I have nothing to do with, is to fill in the ADSL Internet user name and password). The laptop finds a wireless network and is connected to the Internet, and other PCs are available. God, thank the Big Brother who posted "zengdeyy"!

Summarize:

1. Instruction manual This is sometimes not a whole letter, especially the translation over.

2. Practice the truth, "do not connect to the Internet, or you may appear 196.168.1.1 can not open, to wait for the welcome interface, according to the prompts to connect to the Internet," this is crucial, most of my repeated war failures are due to fail to do this.

3. Experts ' advice should be taken seriously, not too rebellious.

4. Most of the articles on the web are too focused on describing the whole process, the attention to detail is not enough, especially the small problem is like ignoring. So we should pay attention to the search in some forums where the posts, there is likely to have your content.