Under Linux The SVN server supports both Apache HTTP and Svnserve standalone servers in both modes and uses the same access rights account _linux

Source: Internet
Author: User
Tags md5 svn svn client iptables password protection ssl connection tortoisesvn tortoisesvn download

Description

Server operating system: CentOS 6.x

Server ip:192.168.21.134

To achieve the purpose:

1, install the Configuration SVN service on the server;

2, configure the SVN service also supports Apache HTTP and svnserve Independent server two modes of access;

3, Apache HTTP and svnserve Independent server two modes of use the same access rights account.

Specific actions:

First, close SELinux

Vi/etc/selinux/config

#SELINUX =enforcing #注释掉

#SELINUXTYPE =targeted #注释掉

selinux=disabled #增加

: wq! #保存退出

Setenforce 0 #使配置立即生效

Second, open the firewall port

System Yun-wei www.osyunwei.com warm reminder: System operation of the original content © copyright, reproduced please indicate the source and the original link

Apache based HTTP mode with a default port of 80

Standalone server mode based on Svnserve, default port is 3690

Vi/etc/sysconfig/iptables #编辑防火墙配置文件

# Firewall configuration written by System-config-firewall

# Manual Customization of this file is not recommended.

*filter

: INPUT ACCEPT [0:0]

: FORWARD ACCEPT [0:0]

: OUTPUT ACCEPT [0:0]

-A input-m state--state established,related-j ACCEPT

-A input-p icmp-j ACCEPT

-A input-i lo-j ACCEPT

-A input-m state--state new-m tcp-p TCP--dport 22-j ACCEPT

-A input-m state--state new-m tcp-p TCP--dport 80-j ACCEPT

-A input-m state--state new-m tcp-p TCP--dport 3690-j ACCEPT

-A input-j REJECT--reject-with icmp-host-prohibited

-A forward-j REJECT--reject-with icmp-host-prohibited

COMMIT

: wq! #保存退出

Service iptables restart #最后重启防火墙使配置生效

Third, the installation of Apache

Yum install httpd Apr apr-util httpd-devel #安装Apache

Yum install mod_dav_svn mod_auth_mysql #安装基于Apache的http模式访问的支持模块

Chkconfig httpd on #设置开机启动

Service httpd start #启动Apache

Httpd-version #查看Apache版本信息

cd/etc/httpd/modules/

#查看是否有mod_dav_svn. So and mod_authz_svn.so modules, if any, MOD_DAV_SVN installation success!

#mod_auth_mysql模块是用数据库存储账号信息, this tutorial is not covered and can not be installed!

NOTE: If Apache prompts for an error after startup:

Httpd:httpd:Could not reliably determine the server's fully Qualif domain name using:: 1 for ServerName

Solution:

vi/etc/httpd/conf/httpd.conf #编辑

ServerName www.example.com:80 #去掉前面的注释

: wq! #保存退出

Four, install SVN

Yum Install subversion #使用yum命令在线安装

Svnserve--version #查看svn版本信息

Five, configure SVN

1. Create SVN version Library

Mkdir-p/home/svn #创建svn版本库存放目录

CD/HOME/SVN #进入目录

Svnadmin Create/home/svn/project1 #创建svn版本库project1

Svnadmin create/home/svn/project2 #创建svn版本库project2

Svnadmin create/home/svn/project3 #创建svn版本库project3

2, set the configuration file

Mkdir-p/home/svn/conf #创建配置文件目录

CP/HOME/SVN/PROJECT1/CONF/PASSWD/HOME/SVN/CONF/PASSWD #拷贝账号密码配置文件模板

Cp/home/svn/project1/conf/authz/home/svn/conf/authz #拷贝目录权限配置文件模板

cp/home/svn/project1/conf/passwd/home/svn/conf/svnserve.conf #拷贝全局配置文件模板

VI/HOME/SVN/CONF/PASSWD #编辑, add the following code

[Users]

# Harry = Harryssecret

# sally = Sallyssecret

osyunwei=123456

osyunwei1=123456

osyunwei2=123456

osyunwei3=123456

: wq! #保存退出

Vi/home/svn/conf/authz #编辑, add the following code

[Groups]

admin = Osyunwei

Project1 = Osyunwei1

Project2 = Osyunwei2

PROJECT3 = Osyunwei3

[/]

@admin = RW

* =

[project1:/]

@admin = RW

@project1 = RW

* =

[project2:/]

@admin = RW

@project2 = RW

* =

[project3:/]

@admin = RW

@project3 = RW

* =

: wq! #保存退出

Vi/home/svn/conf/svnserve.conf #配置全局文件, add the following code at the end

[General]

Anon-access=none #禁止匿名访问, set to none. Default to read, parameters: Read,write,none

Auth-access=write #授权用户写权限

PASSWORD-DB=/HOME/SVN/CONF/PASSWD #用户账号密码文件路径, can write absolute path

Authz-db=/home/svn/conf/authz #访问控制权限文件路径, can write absolute path

REALM=SVN #每个SVN项目的认证命, will be displayed in the authentication prompt, recommend write project name.

: wq! #保存退出

3, Start SVN

svnserve-d-r/home/svn--config-file/home/svn/conf/svnserve.conf--listen-port 3690

#--config-file after the global configuration parameter file

Ps-ef|grep svn|grep-v grep #查看进程

Netstat-ln |grep 3690 #检查端口

Killall svnserve #关闭svn

4, set up SVN service boot

VI/ETC/INIT.D/SVN #编辑, add the following code

#!/bin/sh #
chkconfig:2345
# processname:svn
svn_bin=/usr/local/svn/bin
svn_port=3690
SVN_HOME=/HOME/SVN
svn_config=/home/svn/conf/svnserve.conf
if [!-F "$svn _bin/svnserve"]
then
echo "Svnserver startup:cannot start" "Exit Fi Case", "in
start"
echo starting svnserve ... "
$svn _bin/svnserve-d-R $svn _home--config-file $svn _config--listen-port $svn _port
echo" successfully! "
;;
Stop)
echo "stoping svnserve ..."
killall svnserve
echo "successfully!"
;;
Restart)
$ stop
$ start
;;
*)
echo "USAGE:SVN {start | Stop | Restart} "
exit 1
Esac

: wq! #保存退出

chmod +x/etc/init.d/svn #添加执行权限

Chkconfig svn on #开机自启动

Service svn start #启动

Vi. Configuring SVN to support HTTP access

1, create account password Authentication file

HTPASSWD-CM/HOME/SVN/CONF/HTTP_PASSWD Osyunwei

Htpasswd-m/home/svn/conf/http_passwd Osyunwei1

Htpasswd-m/home/svn/conf/http_passwd Osyunwei2

Htpasswd-m/home/svn/conf/http_passwd Osyunwei3

Enter the password 2 times according to the prompts.

Attention:

/home/svn/conf/directory below the passwd file is a svnserve independent server to use the authentication file, the password is not encrypted, clear text display.

The/home/svn/conf/directory below http_passwd file is the Apache HTTP mode used by the authentication file, the password used MD5 encryption.

passwd and http_passwd files, the account password must be set to the same.

2, set the Apache configuration file

Vi/etc/httpd/conf.d/subversion.conf #编辑, add the following code at the end

<Location/svn>

DAV SVN

#SVNPath/HOME/SVN

Svnparentpath/home/svn

# # Limit Write permission to list of valid users.

# <limitexcept Get PROPFIND OPTIONS report>

# # Require SSL connection for password protection.

# # Sslrequiressl

#

AuthType Basic

AuthName "Authorization SVN"

Authzsvnaccessfile /home/svn/conf/authz

AuthUserFile /home/svn/conf/http_passwd

Require Valid-user

# </LimitExcept>

</Location>

: wq! #保存退出

3, set directory permissions

Chown apache:apache/home/svn-r #设置svn目录所有者为Apache服务运行账号apache

4, restart the Apache service

Service httpd restart #重启

Vii. Test SVN

Install the SVN client tortoisesvn under Windows.

TortoiseSVN Download Address: http://tortoisesvn.net/downloads.html

After Setup completes, desktop-right click, select tortoisesvn-Version Library browser

URL Input: Svn://192.168.21.134/project1

User name: Osyunwei1

Password: 123456

Check: Save authentication

Are you sure

You can enter the Project1 version Library directory, and after right-clicking, you can choose to create a folder, and so on.

URL Input: Http://192.168.21.134/svn/project1

Username and password the same as above, you can enter the Project1 version Library directory, right-click, you can choose to create folders and other operations.

Project1 Access:

Svn://192.168.21.134/project1

Http://192.168.21.134/svn/project1

User name: Osyunwei1

Password: 123456

Project2 Access:

Svn://192.168.21.134/project2

Http://192.168.21.134/svn/project2

User name: Osyunwei2

Password: 123456

PROJECT3 Access:

Svn://192.168.21.134/project3 #svnserve独立服务器模式

Http://192.168.21.134/svn/project3 #Apache的http模式

User name: Osyunwei3

Password: 123456

Extended reading:

1, Apache htpasswd command option parameter description

-C Create an encrypted file

-N Do not update the encrypted file, only the user name password encrypted with the Apache HTPASSWD command is displayed on the screen

-M default Apache HTPASSSWD command uses MD5 algorithm to encrypt passwords

The-D Apache htpassswd command uses the crypt algorithm to encrypt passwords

-P Apache htpassswd command does not encrypt passwords, i.e. plaintext passwords

-S Apache htpassswd command uses the SHA algorithm to encrypt passwords

-B Enter the username and password together with the Apache HTPASSSWD command line instead of prompting for a password

-D deletes the specified user

2, Svnpath and Svnparentpath difference:

Svnparentpath: Supports the SVN version library of multiple identical parent directories.

Svnpath: Only the SVN version library of one home directory is supported, and if a new project is built under the home directory, the prompt does not have access.

At this point, there are two modes in which the SVN server in Linux supports Apache HTTP and svnserve standalone servers and use the same access rights account tutorial completed.      

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.