Unilateral bridge and lateral parking

Unilateral Bridge:

1. Before passing through the left bridge, make the left cover line and the left bridge center line the same line;
2. When the revolver is mounted to the bridge, it slows down properly;
3. When the left rear wheel is just behind the bridge, immediately round to the right;
4. When the left cover line is opposite to the left edge of the Right bridge, the left side is immediately circled;
5. When the right front wheel is mounted to the bridge, immediately circle the right side. Then, make a slight correction in the direction until the front is right.

 

Side parking:

1. Move slowly along the parking space and stop when there is Pole 1 in the rear window;

2. Shift the shift, tap the horn, and turn the left turn lamp to prepare for reversing;

3. When reversing, when the right side of the rear window of the small triangle center and Pole 1 are flattened, 1 lap to the right half, immediately look at the left side of the rearview mirror;

4. After the fourth pole appears in the left-side rear view mirror, go to the left to the end and look at the front;

5. Both sides of the front are located in the middle of Pole 1 and pole 2. Stop the car (you do not have to return to the right direction to keep the position at the time of parking );

6. Step on the clutch, mount the first gear, right turn the lamp, and press the horn to prepare the parking space;

7. Move the car along the left side. When the small rearview mirror on the right side of the car is on the first pole, 3 turns to the right and the car is out of the parking space;

8. When the front of the car is in the correct direction, the system moves back to the left side and continues.