Units specified don ' t exist shsucdx can ' t install

Unist specified don ' t exist. SHSUCDX can ' t install

translation means that a specific partition (unit) does not exist, SHSUCDX can not install the

shsucdx (. COM) CD-ROM extension program under DOS, install the SATA optical Drive program.


possible causes of this problem: 1. The

hard disk partition is not activated (you can use Fdisk or Diskgen view, Diskgen view the activated partition as red)

2, hard drive bad

3, The hard drive is not recognized properly (for example, some SATA hard drives cannot be identified by DOS systems that are not loaded with SATA drives).

Diagnostics and resolution process:

1, first use the Diskgen tool to see if the system partition is activated (reactivate the partition that will be installed on the system), and the file system format of the partition (such as NTFS or FAT32). Then the problem is not resolved, then the following operation.

2, reboot into the BIOS (press F2), restore factory settings (load manufacture defaults), set CD Boot (boot-> CD/DVD drives), set the hard drive mode to compatibility mode (advanced-> IDE configuration-> SATA. Mode (presumably so)-> compatible).

3, then save, restart, start using the Ghost system disk for system installation. Solve the problem.

PS: If you do not want to be so troublesome, then use a pure system disk for installation, or a newer version (with SATA Drive Drive) of the ghost system disk to install. There is the use of Ghost system disk with the PE system to install (into the PE system, on the desktop can see "Ghost Installation" system).

Update: If the hard drive has a bad way, can detect the bad location, and then set up a separate partition for Bad road, hidden bad road zoning.