USB flash disk boot PE installation XP

Longko 1gu Disk Enable the USB flash drive. Install WINXP
 
1. USB flash disk formatting
Want to start the installation system with a USB flash drive Usb zip format is recommended Best compatibility
Usboot is used. A large number of USB flash drives, but not 1 gb usb flash drives. ZIP Format
I used Fla. Shboot uses the built-in dossystem File
 
2 motherboard startup settings
For USB boot options Choose USB zip boot for the motherboard. You can use the format The converted USB flash drive enters dos.
Some boards do not have USB Select zip usb hdd Mode Select remova. Ble is the first startup mode
Motherboard startup settings should be tasted more Try a lot of original USB flash drives that cannot be started Because the main board BIOS Not Set
(My double-sensitivity C51 master) The Board is removab. By using a USB flash drive. Not set yet The main board is not supported)
Be sure to try more
Usbzip Mode The current motherboard supports
One function that can be started to DoS You can create a PE boot disk. Now
 
3. Create a PE boot disk
Many online versions
I chose this site master yo PE created by NSM: the most Handsome W can be installed on the USB flash drive Inxpe boot disk
Details of this version You can view this post:
Http: // bbs .Wuyou.com /Viewthrea D. php? Tid = 86175 & extr A = Page % 3d4
I chose this version. It is easy to install and use Maintain and install the system. All of them have access to the Internet (unfortunately not yet) Support for my C51 Integrated Network Card)
This PE is available at the end of this article. Of
Production process:
Delete several D files on the USB flash drive. OS Startup File
A is extracted using ultraiso Obtain the rxpe in the image. Com, rxpe. s If, rxpe. Im _ And rxpe. LDR files to the USB flash drive
B To rxpe. LDR The file name is ntldr ( If no suffix exists, the complete file name is nt. LDR)
C. Extract setup from the image Ntboot in the directory . EXE to the C root directory
D. Run CMD in the C-drive root. Run ntboo in the directory T. exe x: (x is the drive letter of your USB flash drive)
Now you can use your USB flash drive. Started to PE
 
4. Copy the image of the XP installation disk File to USB flash drive
I chose depth. The lite version is good and can be upgraded to winplay1 through genuine verification. 1 and IE7
 
Http: // www .52zy.com/ Down/660/
After the download is completed To your USB flash drive
Set the driver you need Also on the USB flash drive
 
5. Install the system
A. Use a USB flash drive to start PE
B. If it is a new hard disk, you can use Partition with tool pm and use Pdtt reconstruction MBR
C. Start Menu program in PE Vdm virtual optical drive in the group Enable vdm to load the depth X on your USB flash drive P installation Image
D. Open the virtual optical drive and double-click setup. Select drive C as prompted by the program. The system automatically copies the file Hard Disk
After the e program is copied, remove the USB flash drive and restart the computer. The system will automatically complete the XP Install
F install and copy on the USB flash drive beforehand Driver
 
The preceding steps
The most important thing is the B of the motherboard. IOS settings
Many cannot be started by a USB flash drive The reason is not set.
Be sure to try more
Certainly.
 
We have already tried it on the motherboard of the 865 945 c5c61 chip. Pass
The entire installation process is 20 minutes Clock
Fast and convenient
If you do not like depth You can also select other installation methods for the lite version. Images
I have also tried Shanghai g-o-v-e-r- N-m-e-n-t You can select an image for installation. Copy all files to hard Disk)