The scsi optical drive on the server is broken, and there is no usb interface and no IDE interface on the motherboard. You can only install RedHat9 in ftp MODE from a floppy disk. The installation method is as follows: 1. Create a floppy boot disk and a drive disk of a network device. Run \ dosutils \ rawritewin \ rawwritewin.exe in windows to load the following two image files for the floppy disk and create the image bootdisk. imgdrvnet. img2, set up an ftp server site in the LAN environment, the redh server scsi drive is broken, and there is no usb interface, the motherboard does not have the IDE interface, you can only start the ftp method from a floppy disk to install RedHat9.
The installation method is as follows:
1. Create a floppy boot disk and a drive disk for network devices.
Run \ dosutils \ rawritewin \ rawwritewin.exe in windows
Load the following two floppy disk image files to create the image.
Bootdisk. img
Drvnet. img
2. Set up an ftp server site in the LAN environment, copy all the content of the redhat93 disks, and publish
3. When linux is started on a floppy disk
Boot: linux askmethod
4. Select ftp for Installation
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.