Use a USB flash drive to reinstall the win10 system.

Use a USB flash drive to reinstall the win10 system.

Windows system is installed on a USB flash drive. Today, I will share with you how to install win10 with a USB flash drive. Give some help to friends who are not familiar with computer systems. Prepare the USB flash drive pe system in advance. You can use "youqitong" or "Old Mao Tao" to create a USB flash drive. You can search it online. Not described in detail

Press F12 or F9 to enter boot mode. Select usb boot guide. Enter the USB flash drive PE System

Go to the pe system and select the partitioning tool (different pe systems may be different ). You can select "partition master ". Go to the system partition page

The following describes how to partition the content of a document disk (d drive E drive) without retaining it. It is often used for converting windows to win10 systems and requires re-partitioning because the partition tables of the two systems are different.

Go to the partitioning tool and select "Fast partitioning". This method will erase all the data in the disk.

Custom partition: System Disk and document disk size are divided based on your needs. It is recommended that the C drive should be divided into one for your convenience. Note: select "New ESP partition" in the lower left corner ".

After partitioning, click OK. Whether to format the partition. Select "yes"

Install the system: Your system image package can be saved in a USB flash drive, copied to a local computer, or other storage devices.

Go back to the main interface, go to "Deployment Management (image restoration)", and click "recovery function-System Restoration"

Restore the system, select the system image package location and installation location (disk C), and click "OK" to restore the system. Progress bar green

After the system is restored, click OK. Restart your computer to enter the configuration page of The New win10 system.