Use atmadm to display the statistics of incoming and outgoing calls uploaded by the ATM Adapter

Atmadm
The connection and address of the monitor registered by the ATM Call Manager on the asynchronous transmission mode (ATM) network. You can use atmadm to display the statistics of incoming and outgoing calls uploaded by the ATM adapter. If this parameter is not included, atmadm displays statistics on the status of active ATM connections.

Syntax
Atmadm [/C] [/A] [/S]

Parameters
/C
Displays call information about all current connections to the ATM Nic installed on this computer.
/
Displays the registered ATM Network Service Access Point (NSAP) address for each adapter installed on the computer.
/S
Displays the statistics of the ATM connection status of the monitoring activity.
/?
Display help at the command prompt.
Example
Show call Information
For the ATM network adapter installed on this computer, to display all the call information currently connected to it, type:

Atmadm/C

Using the atmadm/C command will output results similar to the following:

Windows ATM Call Manager statistics

ATM connections on Interface: [155] olicom atm pci adapter

Connection VPI/VCI remote address/
Media parameters (rates in bytes/sec)
In pmp svc 0/193 47000580ffe000000f21a2e180020481a2e180b
TX: UBR, peak 1516, AVG 0, maxsdu 0
RX: UBR, peak 16953936, AVG 16953936, maxsdu 1516
Out P-P SVC 0/192 47000580ffe000000f21a2e180020481a2e180b
TX: UBR, peak 1516, AVG 16953936, maxsdu 16953936
RX: UBR, peak 16953936, AVG 16953936, maxsdu 1516
In pmp svc 0/191 47000580ffe000000f21a2e180020481a2e180b
TX: UBR, peak 1516, AVG 0, maxsdu 0
RX: UBR, peak 16953936, AVG 16953936, maxsdu 1516
Out P-P SVC 0/190 47000580ffe000000f21a2e180020481a2e180b
TX: UBR, peak 1516, AVG 16953936, maxsdu 16953936
RX: UBR, peak 16953936, AVG 16953936, maxsdu 1516
In P-P SVC 0/475 47000580ffe000000f21a2e18108c110081501
TX: UBR, peak 9188, AVG 16953984, maxsdu 16953984
RX: UBR, peak 16953936, AVG 16953936, maxsdu 9188
Out pmp svc 0/194 47000580ffe000000f21a2e18450c110081501 (0)
TX: UBR, peak 9180, AVG 16953984, maxsdu 16953984
RX: UBR, peak 0, AVG 0, maxsdu 0
Out P-P SVC 0/474 470091800000000613e5bfe00000c110081500
TX: UBR, peak 9188, AVG 16953984, maxsdu 16953984
RX: UBR, peak 16953984, AVG 16953984, maxsdu 9188
In pmp svc 0/195 47000580ffe000000f21a2e18450c110081500
TX: UBR, peak 0, AVG 0, maxsdu 0
RX: UBR, peak 16953936, AVG 16953936, maxsdu 9180

The following table describes each element in the atmadm/C output example.

Date type display description
Connection information in/out call direction. In indicates the network adapter from another device to the ATM. "Out" indicates connecting an ATM network adapter to another device.
PMP point-to-point call.
P-P point-to-point call.
SVC is connected by a switchable virtual switching circuit.
PVC is connected through a permanent virtual circuit.
VPI/VCI: the virtual path and channel for incoming and outgoing calls.
The NSAP address of the remote address/media parameter 47000580ffe000000f21a2e18450c110081500 call (input) or the ATM device that is called (output.
The TX parameter includes the following three elements:
Default or specified transfer rate type (UBR, CBR, VBR, or ABR)
Default or specified line speed
Size of the specified service data unit (SDU)

The RX parameter contains the following three elements:
Default or specified transfer rate type (UBR, CBR, VBR, or ABR)
Default or specified line speed
Size of the specified SDU

List all registered addresses
For each adapter installed on the computer, the address of the registered ATM Network Service Access Point (NSAP) is displayed.

Atmadm/

Use the atmadm/a command to output results similar to the following:

Windows ATM Call Manager statistics

ATM addresses for interface: [155] olicom atm pci adapter

47000580ffe000000f21a2e18450c110081500

Show statistics
To display the statistics of the ATM connection status for monitoring activity, type:

Atmadm/s

Using atmadm/s will output results similar to the following:

Windows ATM Call Manager statistics

ATM Call Manager statistics for interface: [155] olicom atm pci adapter

Current active cballs = 4
Total successful incoming cballs = 1332
Total successful outgoing cballs = 1297
Unsuccessful incoming cballs = 1
Unsuccessful outgoing cballs = 1
Callclosed by remote = 1302
CILS closed locally = 1323
Signalling and ILMI packets sent = 33655
Signalling and ILMI packets converted ED = 34989

The following table describes each element in the atmadm/s output example.

Call Manager statistics
The ATM adapter installed on this computer is currently calling.
All incoming calls are successfully received from other devices on the ATM network.
All outgoing calls are successfully called by other ATM devices on the network.
Failed incoming call failed to connect to this computer.
An outgoing call that fails to connect to other devices on the network.
A remote call is disabled by a remote device on the network.
A locally closed call is disabled by this computer.
Number of Integrated Local Management Interface (ILMI) data packets sent from the signal and the ILMI data packet sent to the switch that the computer is connecting.
Number of ILMI packets received by the signal and the received ILMI packets from the ATM switch.