Use minicom to control the serial port configuration of the target board in FedoraCore6 or Core5
Source: Internet
Author: User
In FedoraCore6 or Core5, use minicom to control the serial port configuration of the target board-Linux general technology-Linux technology and application information. The following is a detailed description. : 0wl; l1
Recently, because of the U-BOOT Kernel File upgrade in the processing of embedded systems, but need to set up a Fedora Core5 or 6 system, access the target board serial port through minicom, so as to achieve the purpose of controlling the target board, however, in the actual configuration of minicom, communication fails. When the Fedora Core6 PC is connected to the target board using the RS232 serial port, there is no response in The minicom environment. However, for the same hardware, after the PC is installed with XP, the target board can be normally accessed through the Super Terminal. Therefore, it is determined that the configuration of minicom in Fedora Core5 or Core6 is incorrect, but no reason has been found so far. Now we will put the picture of the minicom configuration here. I hope you can give me some advice, how can we achieve normal communication.
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.