Use SpeedFan to control CPU fan speed and speedfan fan speed
Use SpeedFan to control CPU fan speed
Step-by-Step reading
Original article: To see SpeedFan, many of my friends want to use SpeedFan to automatically control the CPU fan speed.
I just opened the software and showed too many projects, which is not simple and clear enough. As shown in the figure, the fan speed of Fan2 is 1985. However, this does not affect the CPU fan speed adjustment. Next, I will introduce in detail how to use SpeedFan to automatically adjust the speed of CPU fan.
Tools/Raw Materials
STEP/Method
- 1SpeedFan Configuration
Many friends turn on the software and adjust the fan speed "Speed0x". Then they find that it is ineffective and disappointing. In fact, SpeedFan is not familiar with its usage, which leads to the illusion that it is useless software. In fact, there are some simple preparations before the speed is officially adjusted. Let's first enter the configuration
- 2
- 3. Go to the [advanced] menu and select the control chip in the "chip" position. Do not worry if you are not familiar with it, because you can see the picture only when you select the correct control chip, if other options are selected, these options are not available. If you do not select the chip type, read the article. Then, select the "PWM 2 mode" option, which refers to the control of the fan 2 (PWM 1, 3, 4, 5, and so on ). We need to set the control mode for the lower end. here we need to select "software control 」. Then [remember]. In this way, we can go back to the main screen to adjust the fan speed. Note that when the rotation speed of some fans is less than a certain degree of X %, the fan will stop, so remember to pay attention to the fan speed to avoid losses. For general fans, when the speed is 0%, the fan speed is the slowest.
Fan1/Speed01 is usually used for CPU fan outlet (CPU_FAN), Fan2/Speed02 for system fan outlet (SYS_FAN), and Fan3/Speed03 for power fan outlet (PWR_FAN ). The author's FOXCONN G31AX-K motherboard is Fan2/Speed02 for the CPU fan outlet (CPU_FAN ).
- 4
Configuration speed
- 5 select speed 02 (each person's computer is different, some are 01, as long as the CPU fan speed)
- In the lower part of figure 6, the automatic speed adjustment function of SpeedFan is enabled.
Configure the speed after 02
- 7. We can manually adjust the fan speed "Speed 02" and then find that the FAN 2 speed changes significantly. Since we are adjusting the speed of the CPU Fan Fan2, we do not need to display other Fan x Data.
- 8. Set the [Fan].
- After configuration
- Automatic Speed Control Configuration
Although we can adjust the speed manually, we are not satisfied yet.Next, we need Fan2 to automatically adjust the speed according to the CPU temperature, so we need to configure the temperature, tell Fan02 which is the CPU temperature, and then adjust the speed based on the temperature.
- After temperature Configuration
- Finally, tick "Auto Adjust fan speed. However, it should be noted that the control chip of the motherboard MUST be supported by SpeedFan, and the outlet where the fan is located must have the speed control function, so that the automatic speed control of SpeedFan can take effect. If we enable the automatic speed control of SpeedFan when it is started, put the SpeedFan shortcut in the "Start" folder, so that the software will automatically start when it is started, and then automatically adjust the speed according to the CPU temperature. In addition, you can press the F2 key to change "Speed 02" to "CPUFAN speed 02 ",.
- Other software functions
In addition, the software also provides a built-in evaluation function for hard disk health and performance. You can also use the online analysis function to perform more in-depth evaluation on your hard disk.
Everyone has a deeper understanding of the SpeedFan software. It should help you have a quiet summer. You can download it at www.crsky.com/soft/10252.html.
- Related Questions
Finally, some people put forward: "How can we set the speed to 60% in SpeedFan? How can we reach 100% again when we start the machine ?" This issue is mainly about the maximum speed and the initial value of SpeedFan boot. Generally, the maximum speed is 100%, and the rotation speed is automatically adjusted from 100% according to the CPU temperature. If you want to fix the speed at 60%,
END
Notes
- The software speed setting cannot be saved, and you have to reset it every time you start the system. This is a major drawback of this software and we hope to improve the software version in the future.
- Some motherboard may suddenly shut down after using this software.
