Use the wireless router relay function to improve network speed

I would like to introduce you to the method of the wireless router relay function. Many people may not understand the function of the wireless router relay function. It does not matter. After reading this article, you will certainly have a lot of GAINS to make your signal stronger.

Use the wireless router relay function to improve network speed

My Wireless Router IP address 192.168.1.1 DHCP is off and no encryption is set. If linksys ap is enabled, IP is set to 192.168.1.254, the gateway 0.0.0.0 DNS 0.0.0.0 DHCP has disabled the wireless Nic IP address in my laptop and set it to 192.168.1.2 the gateway 192.168.1.1 DNS to the DNS address provided by China Telecom. after the wireless router relay function is enabled, I can use the search program that comes with the wireless network adapter to receive two signals with the same SSID, but the MAC address.

Not the same. One is AP and the other is a wireless router. If I choose to connect to the AP, the network will fail, PING does not get through anything, including the gateway DNS and the IP address of the AP. However, if I choose to connect to the signal of the wireless router, everything works... does this mean that the AP's relay function is useless ?? Or where did I set it wrong ?? My wireless router is the WAP11 of the ap of APLinksys in DLINK 524.

Wireless Router relay function: The following describes the functions of linksys WAP11:

◆ Access Point wireless router relay function)

Working in pure AP Access Point mode, which is the same as normal AP and Supports Wireless Network Adapter access of 802.11b 11 Mbps or 802.11b + 22MBps. (AP mode can be connected to multiple wireless clients in point-to-point mode than Linksys's WET11, up to 250 ).

◆ Wireless Client Bridge Mode)

Like Linksys's WET11 and D-LINK's DWL-810 +, it works in a bridge mode that can be Bridge with any AP. Use Site Survey signal search) to search the SSID of the AP or wireless route of the other party, and then click Connect to Connect. This is so simple! (Working in this mode, DWL-900AP + will not launch a signal again, only receive wireless signals from other AP or wireless routes, and then convert the wireless signal into a wired signal, just like a wireless NIC with no driver needed for a LAN port) (Wireless Bridge Mode, applicable to satellite sharing, XBOX PS2 connected to a wireless network or when a wireless Nic is driver-free for desktops ).

◆ Wireless BridgeAP to AP Wireless bridging)

Supports two DWL-900AP + Wireless bridging mode to connect two different LAN, set the Bridge mode as long as the MAC code of the AP to fill in the AP's "Wireless Bridge" item can be, this mode no longer sends wireless signals to other wireless customers. Suitable for wireless communication between two buildings)

◆ Multi-point Bridge Multi-AP bridging)

Support more than two DWL-900AP + wireless bridging, DWL-900AP that will be placed in the center + select "Multiple Bridge" wireless router relay function) then other DWL-900AP + unified DWL-900AP + MAC code in the central position of your own "Wireless Bridge" item can be. Suitable for wireless communication between multiple buildings)

◆ Repeater (universal wireless signal relay) is the most useful function for wireless bridging and wireless relay! DWL-900AP + supports wireless signal relay between two AP enhance wireless distance, or relay other brands of wireless routing or AP, whether 11 M 22 M 54 M trunk M can relay, many brands of wireless routing and AP have been tested, and no incompatible found, this feature is the same as the D-LINK's Universal Relay DWL-800AP +.

As long as you set DWL-900AP + to Repeater (Wireless Router relay function), then use the Site Survey signal search of the Wireless Client item) to search for nearby AP or other Wireless route SSID connections, then copy the MAC of the AP or wireless route to the Repeater Remote ap mac bar of the DWL-900AP +. As long as other AP or wireless routing connected to broadband, DWL-900AP + can receive wireless signals and then weaken the wireless signal and then amplified and sent out, suitable for far wireless clients for signal amplification, or it is used for wireless bridging and then Transmitting signals to the wireless Nic for receiving.

(Note! The relay function of the wireless router. Set the options in Performance (Wireless Performance value) of both parties for other Wireless AP or route operations. The Preamble Type indicates the pre-frame mode) select Long Preamble Long Front Frame), DWL-900AP + TX Rates select 1-2-5.5-11 (Mbps) compatibility will be better is the most powerful ap I have ever seen, it can be regarded as a stand-alone Wireless AP Bridge. It is suitable for users who like an AP and have all the wireless functions and have established a wired LAN. It does not have the router function, compatible with 802.11b fast relaxation wireless product LZ check if Wireless AP and route channels are the same?