Use two bluetooth adapters to share two computers and access the Internet at the same time

 

Use two bluetooth adapters to share two computers and access the Internet at the same time

Our Division has two desktop computers, 8-10 meters away, with a wall between them. One is connected to the Internet through ADSL in the director's office, and the other is not connected to the Internet in the doctor's office. After two days of hard work last week, two bluetooth adapters were used to share two computers and access the Internet at the same time. I would like to thank Ah Hui for his patience and guidance. Of course, it is inseparable from my own ingenuity.

1. Install the Bluetooth adapter on both computers. In this step, you must install a full set of software programs attached to the software program, instead of installing the drive path through windows "discover new hardware", and you must install the Bluetooth Network.

2. Set the network card of the computer that can access the Internet to share: network connection-local connection (right-click)-properties-advanced-share

3. Set the IP address of the NIC that can access the Internet on the computer: network connection-local connection-properties-General-Internet Protocol (ICP/IP)-properties: IP address 192.168.1.1 sub-off mask: 255.255.255.0

4. Set the IP address of the Bluetooth network that can access the computer: IP address 192.168.0.2 sub-off mask: 255.255.255.0 Default Gateway: 192.168.0.2

 

5. Set the IP address of the Bluetooth Network that cannot access the computer: 192.168.0.1 sub-off mask: 255.255.255.0

Note the preceding settings:

(1) The third IP address of the local connection of the network adapter cannot be the same as that of the Bluetooth Network, that is, if the IP address is 192. 168. ×. if the X of 1 Nic is equal to 1, the X of Bluetooth cannot be 1. for example, if the network card is 192.168.1.1, you must set 192.168.0.1 or 192.168.2.36 for Bluetooth. In the case of professionals, two connections cannot be located in the same IP segment.

(2) the gateway must be set for the Bluetooth connection of the computer that can access the internet. The first three must be the same as the IP address. In this example, if the IP address of the Bluetooth is 192.168.0.2, the gateway must be set to 192.168.0. ×, × equals to any value (less than 255)

(3) do not set a gateway for the local connection of the network card on the computer that can access the Internet

(4) The Bluetooth IP addresses of the two computers are set in the same IP segment, that is, the first three digits must be the same, and the fourth digit must be different. In this example, if the Internet access is 192.168.0.2, the Internet access is 192.168.0. ×, and X is equal to any value other than 2 (less than 255)

6. Enable Bluetooth that cannot access the Internet to access the network of the computer.

Before I completed this step, I encountered many situations and made a lot of effort. The most secure access method is:

(1) pairing two computers: Right-click the "Bluetooth Tray" icon on the computer that cannot access the Internet and choose "Add Bluetooth device". It will pop up a setup wizard and press "Next ", the Wizard will search for the Bluetooth devices around you, select the device you want to connect to (a computer that can access the Internet), and then it will ask you to set a password or something like that, on a computer that can access the Internet, a prompt will pop up asking you to allow access and enter the password. Fill in the password you just set. At this time, the two computers should be paired successfully.

(2) Right-click the "Bluetooth Tray" icon that cannot access the Internet, select "quick connection"-"network access", and select the device you are connected to (a computer that can access the Internet ). Note that it is best to connect to a computer that cannot access the Internet, rather than a computer that can access the Internet.

 

7. The two computers cannot access the Internet after the network connection is successful. Many articles on the Internet mentioned previously can connect to the Internet. It took me a day to adjust IP settings and Bluetooth connections. Finally, I saw a master article saying that I must use a proxy server to access the Internet. I just sighed. I'm so stupid, really! CCProxy server, which can be downloaded after Baidu searches.

(1) install CCProxy on a computer that can access the Internet

(2) Select a tool on IE on a computer that cannot access the Internet-Internet option-connection-LAN Settings-tick "use proxy server for LAN"-advanced-set proxy server address and port: HTTP 192.168.0.2 808 FTP 192.168.0.2 808 socks 192.168.0.2 1080

There are many tutorials on proxy server settings. I was directed at the parameters set in the tutorial. I was confused that I didn't know how to install the proxy server program on that machine. Now I know it.

 

Finally, the computer that can access the Internet through ADSL (nonsense), open the proxy server. At this time, another computer should be able to access the Internet. This proxy server can access the Internet and QQ at home and abroad (of course we need to set up a proxy), but it cannot use MSN. I don't know why.

When I got home, I used an adapter to pair my desktop and laptop to share the Internet, deal! The settings are the same. The only difference is that my portable (no Internet access) bluetooth module does not find the "Network Access" function, so I use a desktop (Internet access) the "Access Network" in the Bluetooth tray is the same as success.

Use a Bluetooth adapter to share the Internet with two computers

It's easy! Two laptops, one for Internet, and the other for Bluetooth connection! Haha, let's see how it is done below!

1. First, install the Bluetooth driver on both computers and enable it properly. Then, pair the two computers. The pairing process is as follows:

Turn on "My bluetooth location"-> "find bluetooth device" on any computer"

Right-click another computer and select "pairing device ".

Enter any number in the Bluetooth PIN code in the following interface and press OK.

The following prompt appears on another computer. Click this prompt.

On the displayed page, enter the number you just entered on that computer, and then click "OK ".

The above completes the pairing process of the two computers.

2. Set network connection

First, "enable network connection" on the computer to share the network, right-click "Local Connection" on the computer, and then select "properties ".

Select "Advanced box" in "Local Connection Properties", and select "allow other network users to connect to the Internet through this computer" in "Internet Connection Sharing ", click "OK ".

In "network connection", right-click "Bluetooth Network" and select Properties. Select the TCP/IP protocol in the general box of properties, and then click "properties ".

Set the IP address as follows.

After setting, we can connect. On the computer on which you want to share the network, that is, the computer that cannot access the Internet, right-click the Bluetooth icon on the system toolbar,
Select "quick connection"-> "network access"-> "find device ".

Select the computer on which the network is to be shared and click "Connect ".

A prompt for authorization is displayed on the system bar of the other computer (the computer that wants to share the network) while you are connecting (connecting...). Click this prompt.

 

Click "OK" on the page ".

You have completed all the connection procedures and shared Internet access.

3. at this time, the "Bluetooth" on the two computers will be connected, and the "700.0 kbps" speed will be displayed. the Bluetooth icon is blue-green. double-click the connection status and you will see the connection status of the Bluetooth Network.

You can also double-click the connected "network access" on the computer that shares the network to view the Bluetooth connection status.