Using minicom production to see USB serial port

1 using the command sudo apt-get install minicom installation

2 Configuring with Minicom-s

Select Seral Port Setup, then enter A; Select the port for your device.

To view your own port commands: ls/dev/ttyusb*

Show up to find is ttyUSB0; Then replace the/dev/ttyusb0 with the A-item configuration in Seral Port setup.

I use a USB to serial port serial line.

Then configure the other items.

Then enter e, configure the baud rate, by default configuration can be 115200 8N1 (baud rate: 115200, Data bit: 8, parity bit: N None, stop bit: 1).

After configuring the baud rate, press ENTER, then enter F, configure hardware flow control, select No

Then continue configuring software flow control, and select No. Once configured, press ENTER to return to the previous interface, select Save Setup as DFL (which will save the bit default configuration), and then select Exit to close minicom.

Then enter minicom to open.

Reference URL:

http://blog.csdn.net/mybelief321/article/details/8987658

http://5deweb.blog.163.com/blog/static/4902191120138601058790/

http://blog.csdn.net/mybelief321/article/details/8987502

Using minicom production to see USB serial port