Using Vmvare to build a LAN test MSMQ (i)

Bridging mode to build vmvare virtual machines

MSMQ is very simple to use with the client on the same server, and because of the distributed deployment, and the testing machine is limited, the use of VMware to build LAN test MSMQ is used in this machine. This article is divided into two parts, the first part explains the construction of VMware virtual machine, the second part explains the use of remote MSMQ. The original rational knowledge please ask the students to search the relevant articles in the park, the emphasis here is to describe the use of the method.

The scenario for a project is a distributed deployment and is within an intranet, in order to simulate a production environment, use bridging mode to build a VMware virtual machine with a virtual machine operating system of Windows SERVER R2. Why use bridging mode instead of simpler NAT mode? The answer is I am in NAT mode, the host cannot communicate with the virtual machine. For specific reasons, please also see this article of the Daniel Steering maze. Don't say much nonsense, go to the point, Bridge mode to build Vmvare step by step.

Configuring host Hosts

1. Note: Host uses WINDOW10 system, wireless card . open Control Panel \ All Control Panel items \ Network and Sharing Center \ Change adapter configuration, right-click on "Wireless network Connection" "Properties" and check "VMware Bridge Protocol".

2. In the Share tab, configure the share, as

3. View the [IPv4 address "" IPv4 Subnet Mask "" IPV4 default gateway "for the host network for subsequent configuration of the VMware network, see. Note: If you use a wired connection, the IP address, the default gateway will be different from the wireless connection, but the subsequent configuration of the Vmvare network in the same way, just configure the network segment consistent with the host, the configuration is described in the following explanation.

4. Turn on the host DHCP client and DNS Client Services

Configure VMware

1. The previous steps have configured the host, and now you are ready to configure VMware. The first step is to configure VMware to use bridge mode, open "virtual machine" "Settings" "Network adapter", "Network Connection" tick "bridging Mode"

2. Open "edit" "Virtual Network Editor", tick "bridge mode" and select "network card with host already connected". Note: This machine is using a wireless card

3. Configure the virtual machine IP address, subnet mask, default gateway, and DNS. Open the Virtual machine Control Panel \ Network and internet\ network Connections, and right-click on the local Area Connection "properties" to configure. Note: The virtual machine's IP address is in the same segment as the host's IP address, and the virtual machine's subnet mask is the same as the host subnet mask, and the default gateway for the virtual machine is the same as the host's default gateway, and the virtual machine's DNS is the same as the default gateway for the virtual machine (not the host).

4. Open several VMware-related services on the host,

5. Turn off the virtual machine firewall, this step is important, or the host cannot access the virtual machine. Open "Control Panel \ All Control Panel items \ Windows Firewall \ Custom Settings" To configure,

6. Test the communication between the two parties, first test access to the virtual machine on the host, test through

6. Test access to host hosts in a virtual set, test through

7. At this point, the use of bridge mode VMware Virtual machine communication with the host has been completed. Time relationship, it is 00:24 in the evening, tomorrow also to catch the 9-point train, to hurry to sleep, or miss the car is not like writing code can be re-repaired ... The second part of the remote use of MSMQ will be in the Qingming Festival after the completion, not to be continued, please pay attention.

Using Vmvare to build a LAN test MSMQ (i)