Using VMware Fusion to install CentOS under "OD Hadoop" Mac

One, Nat mode network access

(1) Enter commands in Linux ifconfig view network information

(2) Enter commands in Mac Ifconfig view network information

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether a4:5e:60:ec:ff:3f
    inet6 fe80::a65e:60ff:feec:ff3f%en0 prefixlen 64 scopeid 0x4
    inet 192.168.199.185 netmask 0xffffff00 broadcast 192.168.199.255
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 6a:00:00:60:6a:e0
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 6a:00:00:60:6a:e1
    media: autoselect <full-duplex>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 06:5e:60:ec:ff:3f
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1452
    ether 7a:d1:9a:f2:6c:10
    inet6 fe80::78d1:9aff:fef2:6c10%awdl0 prefixlen 64 scopeid 0x8
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether a6:5e:60:ce:c0:00
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 5 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 6 priority 0 path cost 0
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive
vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 0a:00:27:00:00:00
    inet 192.168.56.2 netmask 0xffffff00 broadcast 192.168.56.255
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:01
    inet 192.168.227.1 netmask 0xffffff00 broadcast 192.168.227.255
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:08
    inet 172.16.53.1 netmask 0xffffff00 broadcast 172.16.53.255

Found two more Vmnet1,vmnet8 interface, played by VMware know this is a virtual network, VMNET1 is Host-only way, Vmnet8 is the way of Nat.

(3) View VMware Fusion Configuration

@webm ? ~ sudo more /Library/Preferences/VMware\ Fusion/networking
VERSION=1,0
answer VNET_1_DHCP yes
answer VNET_1_DHCP_CFG_HASH ****
answer VNET_1_HOSTONLY_NETMASK 255.255.255.0
answer VNET_1_HOSTONLY_SUBNET 192.168.227.0
answer VNET_1_VIRTUAL_ADAPTER yes
answer VNET_8_DHCP yes
answer VNET_8_DHCP_CFG_HASH ****
answer VNET_8_HOSTONLY_NETMASK 255.255.255.0
answer VNET_8_HOSTONLY_SUBNET 172.16.53.0
answer VNET_8_NAT yes
answer VNET_8_VIRTUAL_ADAPTER yes

(4) Edit the system Ech0 Network,

Select Ip4settings

Method Select "Manual"

Click Add

IP address: 172.16.53.100

netmask: 255.255.255.0

Gateway: 172.16.53.2

(5)Vi/etc/sysoconfig/network-scripts/ifcfg-eth0

Add a line dns1=172.16.53.2(gateway address)

(6) Vi/etc/sysconfig/network

Networking=yes

Hostname=yeahwell.abc.com

(6) Vi/etc/hosts

Add a line to the end of the file 172.16.53.100 yeahwell.abc.com

Service Network restart

(7) Network disconnected and reconnected

(8) Ping www.baidu.com

Using VMware Fusion to install CentOS under "OD Hadoop" Mac