Very detailed ghost all run error codes completely uncovered _dos/bat

Reason or countermeasure: incorrect path/file syntax. Make sure that the path and filename are correct, and that you have write permission if you are creating image files on the network.

Error code: 10001

Reason or countermeasure: the user gave up the action.

Error code: 10060

Reason or countermeasure: read a bad source file or disk. Check the disk or image file for problems, whether there is a conflict with the network, if there is a problem with the optical drive.

Error code: 10082

Reason or countermeasure: The shared version of Ghost has expired and must be purchased before it can be used.

Error code: 10170

Reason or countermeasure: reject the check image file or disk. Please use the updated version to resolve this issue.

Error code: 10180

Reason or countermeasure: The hard drive is not responding. Please check the cable, power connection, jumper, and basic output Unit (BIOS) settings. Make sure your system is properly divided by Fdisk to the hard drive.

Error code: 10210

Reason or countermeasure: invalid expansion partition information, may your hard disk partition has been compressed by the hard disk compression software. If they are controlled by this type of drive, ghost cannot locate the hard drive completely. Please unzip the partition first, then execute the Ghost program.

Error code: 10220

Reason or countermeasure: return this error code because you are executing the Ghost program under Windows DOS window. Please try to use Ghost in pure DOS, it is best to start the machine with a DOS disk and then execute the Ghost program.

Error code: 10600

Reason or countermeasure: Ghost cannot properly continue due to lack of memory, see the following 15040 error codes.

Error code: 11000

Reason or countermeasure: invalid backup image file, please reassign the backup image file.

Error code: 12080

Reason or countermeasure: it is generally an attempt to clone a disk to disk on top of the network. Ghost can only perform disk cloning operations on the network via the NetBIOS protocol.


Error code: 12090


Reason or countermeasure: Error reading or writing to the hard drive, try scanning the hard drive first, and then repair the operation before executing ghost.

Error code: 14030

Reason or countermeasure: An unregistered ghost version encounters a file with a date that exceeds its expiration date, please purchase a new ghost version.

Error code: 15010 15020 15030 15050

Reason or countermeasure: return this kind of error code, can try to use GHOST-E to avoid this kind of error.

Error code: 15040

Reason or countermeasure: there is not enough memory to perform ghost, please confirm that the following statement has been added to the Config.sys:

Device=himem.sys

Error code: 15100

Reason or countermeasure: use Ghost-or to refuse to check or update to the latest version to resolve this challenge.

Error code: 15150

Cause or countermeasure: it may be a corrupted image file, please check the integrity of the image file using the local→check→image File command first.

Error code: 15165

Reason or countermeasure: Ghost is having problems accessing files or hard disks on the network, check your network device or use the latest version of Ghost to resolve this challenge.

Error code: 15170

Reason or countermeasure: The source hard disk is not formatted or an invalid partition was encountered. Make sure the source hard drive has been properly partitioned.

Error code: 15175

Reason or countermeasure: a problem that may arise when running on a Compaq machine, use the latest version of Ghost.

Error code: 16040

Reason or countermeasure: There are too many partitions on your hard drive.

Error code: 19080

Reason or countermeasure: most probably the directory or file name that the ghost accesses is invalid.

Error code: 19320

Reason or countermeasure: Ghost can not be performed due to lack of memory, please refer to the 15040 error message above.

Error code: 30004

Reason or countermeasure: the user supplied an incorrect password when reading the encrypted image file and cannot use the image file