View the market performance of the Next Generation switch technology

Source: Internet
Author: User

With the development of China's Networking Industry and the upgrade of switch technology, optical switching has been widely used. Let's take a look at the market performance of these new switch technologies. Digitalization, broadband, fiber-optic transmission, and segmentation are the future development trends of telecom networks and information networks. Therefore, it is necessary to build a comprehensive business platform unrelated to the business type or weak correlation, enables the network to carry multiple services.

In this way, it not only achieves great economic benefits in design, construction, operation and maintenance, but also maintains good adaptability to business development, this maximizes the protection of the investment interests of operators and users. At present, with the development of hardware technology, this idea can be fully achieved technically.

Multi-layer Switching

Currently, layer-2 switching technology is no longer able to meet users' needs, so layer-3 switching technology is emerging. Layer-3 switching combines the advantages of layer-2 switches and layer-3 routers in an organic and intelligent manner into a flexible solution that provides line rate performance at all levels. With the continuous promotion and application of layer-3 Switch Technology in the market, layer-3 switch technology and its products have been widely used in enterprise network/campus network construction and broadband IP network construction (such as man and Smart Community Access, market demand and Technology Development boost the in-depth development of such applications. Applications of layer-3 switching penetrate into the edge access layer from the initial backbone layer and the aggregation layer in the middle.

The Next Generation Network will be more intelligent. If Layer 4 to Layer 7 exchange is introduced, the network can identify the applications and services to which each data packet belongs, then this information is applied to send the data packet to the correct path. Therefore, based on the maturity of layer-3 Exchange Technology, layer-4 to layer-7 exchange technology is gradually accepted and applied to a certain extent.

From a technical point of view, although a layer-3 Switch has most of the functions of an enterprise-level router, it is more powerful than a layer-3 Switch, such as network address translation, and cannot be completely replaced by a layer-3 switch. However, with the development of technology, the functions of layer-3 switches will certainly become more and more abundant. In addition, although the development of layer-3 switches is good in China, it will take a long process to replace enterprise-level routers.

Optical Switching

The rapid and sustained growth of business requires greater network bandwidth to meet the requirements. DWDM technology can effectively solve bandwidth problems, but it is followed by a sharp increase in the number of optical fiber channels and the need for large-capacity optical switches. Dense Wavelength Division Multiplexing (DWDM) can make full use of the huge bandwidth of the optical fiber, so that the "fiber depletion" problem can be effectively solved. In recent years, DWDM technology has penetrated from long-distance trunk lines to man. Due to the sharp increase in the number of multiplexing wavelength channels, the optical fiber transmission capacity can increase exponentially.

At present, the market scale of optical switches is not large, because optical switches are relatively immature in technology and are the main factor limiting the rapid growth of the optical switch market. It is mainly reflected in the immature Research and Development of Optical Switching Matrix technology. However, with the development of technology, the market scale of optical switches will grow. It is predicted that in the next decade, all-optical switches with functions such as Route Selection and error recovery will gradually occupy a dominant position in switches. In a network (such as a LAN) that transmits at a rate lower than 1 Gbit/s, OEO still has obvious advantages, such as high reliability and low cost photovoltaic (OEO) optical Switches are still widely used in low-speed networks.

It is foreseeable that the optical switch composed of optical exchange technology will be gradually popularized and used in the telecom field. With the maturity of various optical switch technologies and other unit technologies, small-scale optical switch devices such as OXC and OADM have been released. The large-scale photoelectric integration with MEMS as the breakthrough point and the large-scale all-optical switching technology as a result have begun to emerge. All-optical switching will play an important role and a huge market in the future optical communication field, and will give birth to another revolution in network technology.

ATM and IP address combination

Although the myth of ATM as an all-around technology has been shattered, so far, ATM is still the most suitable communication protocol for multi-service and multi-bit rate application environments. Therefore, as a multi-service platform, integrating various businesses is the main role in the future. In addition, IP technology will face a lot of problems. For example, QoS of an IP address. At present, many of the solutions are based on the telecom network, but the implementation is very difficult. Therefore, the integration of ATM and IP addresses is another important development direction. The combination of IP and ATM is a combination of connected ATM and non-connected IP addresses, and also an optimal combination of routing and switching.

Currently, there is no high-speed multi-service support capability Like ATM. Therefore, for telecom networks, ATM is ideal as a multi-service platform for a period of time. Even in the foreseeable future, at the edge of the network, ATM is still indispensable as a business collection point. For this reason, many ATM manufacturers are still trying to improve the performance and capacity of the ATM switch, so that it has a place in the next generation telecommunications network. There are two ways to combine ATM and IP. The first is overlap between the two. Although QoS can be ensured, the Protocol complexity is increased. The second is the combination of the two, this solution maximizes the advantages of both ATM and IP addresses.

The ATM technology can provide two-layer high-speed switching. The ATM standard has been gradually improved, and its products have been basically mature and widely pushed to the market. However, the integration of ATM and IP is still evolving, and it takes considerable time to unify industrial standards. Therefore, the switch technology combined with the ATM and IP technology will become the mainstream in the future market.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.