View the running status of a universal Router

You can view the running status of a universal router and view the running status of the router, so that you can quickly learn about the working status of the router and the cause of the failure in the event of failures such as failures on the network, this article describes how to view the running status of a universal router. 1. After the vro is started and successfully logged on to the vro Management page, the vro management interface is displayed. The following menus are displayed on the left-side menu bar: running status, setting wizard, QSS security settings, network parameters, Wireless Settings, DHCP server, forwarding rules, security settings, routing functions, IP bandwidth control, IP and MAC binding, Dynamic DNS and system Tools. Click a menu item to set the corresponding function.

2. Select the menu running status to view the current status of the vro, including version information, LAN port status, wireless status, WAN port status, and WAN port traffic statistics, as shown in:

1. The version information displays the current software and hardware version number of the vro. You can upgrade the software version on the system tool-software upgrade page. 2. the LAN port status is www.2cto.com. the MAC address, IP address, and subnet mask of the current LAN port of the router are displayed here. The IP address and subnet mask can be set on the network parameter → LAN interface. 3. Wireless status the current Wireless Configuration status of the vro is displayed, including the SSID, channel, and bandwidth. You can set the status on the Wireless Settings page.
4. The WAN port status displays the MAC address, IP address, subnet mask, gateway, and DNS server address of the current WAN port of the router, you can set the parameters on the network parameter-WAN port settings page. 5. The WAN port traffic statistics show the data traffic information received and sent by the current WAN port. The user's Internet access method (Dynamic IP/static IP/PPPoE/L2TP/PPTP) is displayed on the right side of the IP address. When the user's Internet access method is PPPoE, L2TP, PPTP, when a user is connected to the Internet, the user's Internet access time and disconnection button are displayed. Click this button to instantly disconnect the user. If the user is not connected to the Internet, the connection button is displayed. You can click this button to perform real-time connection operations.
This article is from