Virtual machine network settings and Linux remote login

Virtual Machine Network configuration:

Open the network connection in the virtual machine settings:

Linux System remote login management tool:

Bridging: The virtual machine uses the native real network card to communicate with the real computer, and the same network segment address as the Windows, can communicate with Windows, can also be accessed with the same network segment within the LAN. Need to occupy an address.

Host-only use virtual machine virtual out of the network card VMNet1, can only communicate with your real machine, can not communicate with LAN, can not Sisu network.

NAT: Using virtual machine virtual out of network card VMNet8, can communicate with real machine, virtual machine can also Sisu network.

Configuration command:

Set LINUXIP address command: ifconfig etho + network segment Address (network segment is the same as Windows), Setup is complete to ping Windows.

Reboot will lose configuration. Permanent changes require configuration files to be changed.

Bridging: If the setup is complete or not communication, click on the virtual machine edit, open the network editor, the default bridge selection to a network card, you can manually adjust to the wired network card.

Tools: SECURECRT Remote Connection tool.

DF: View Partitions.

WINSCP: File Copy tool, Linux and Windows files copy each other.

Virtual machine network settings and Linux remote login