VMWare vSphere Client Cloning virtual machine Change IP

After you clone the virtual machine, view the MAC address that the virtual machine is assigned to.

Open the console and go to the Linux interface.

打开/etc/udev/rules.d/ 70 -persistent-net.rules内容如下面例子所示： # vi /etc/udev/rules.d/ 70 -persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it,  as long  as you keep  each rule on a single # line, and change only the value of the NAME= key. # PCI device  0x1022 : 0x2000 (pcnet32) SUBSYSTEM== "net" , ACTION== "add" , DRIVERS== "?*" , ATTR{address}==" 00 :0c: 29 :8f: 89 : 9 7 ", ATTR{type}==" 1 ", KERNEL==" eth* ", NAME=" eth0" # PCI device  0x1022 : 0x2000 (pcnet32) SUBSYSTEM== "net" , ACTION== "add" , DRIVERS== "?*" , ATTR{address}==" 00 :0c: 29 : 50 :bd: 1 7 ", ATTR{type}==" 1 ", KERNEL==" eth* ", NAME=" eth1"Change the address of "attr{address}" of "eth1" to the MAC address previously recorded. 打开/etc/sysconfig/network-scripts/ifcfg-eth0 # vi /etc/sysconfig/network-scripts/ifcfg-eth0 将 DEVICE= "eth0" 改成  DEVICE= "eth1" , 将 HWADDR= "00:0c:29:8f:89:97" 改成上面的MAC地址 最后，重启网络  # service network restartIf reboot failed # reboot success!

VMWare vSphere Client Cloning virtual machine Change IP