VSFTPD self-rack Linux operating system network server method

Conventions:

1. This post operating environment is Redhat 9.0,VSFTPD version is Redhat 9.0 with vsftpd-1.1.3-8.i386.rpm, in the installation of the third Zhang Zhong of the disk

2. VSFTPD realization of the most basic purpose: the system exists in the real user can log into the FTP, can use anonymous access.

3. The VSFTPD run mode in this post is run in standalone mode, that is to say, vsftpd all functions in this post are run in the standalone mode. As for some functions can be run in xinetd mode, you have to test, can not copy. Because some features must be running in a particular mode.

3. IP and DNS settings for the server

First network card

ip:192.168.0.1

Child Mask: 255.255.255.0

Gateway is not set:

Second network card:

ip:192.168.0.2

Child Mask: 255.255.255.0

Gateway is not set

Because my operating environment is a small local area network, so the IP of other machine is in 192.168.0 this network segment. ADSL is connected to the first network card on the server. The second NIC on the server is the hub, and the other clients are connected to the hub. In order to allow ADSL access to the Internet, because they set the IP manually, so DNS to set up their own, DNS is as follows:

202.96.134.133

202.96.168.68

The Setup tool is:

[Root@linuxsir001 root]# Redhat-config-network

Corresponding reference: VSFTPD official documents:

Http://www.linuxsir.com/bbs/showthr ...; threadid=43451

One. Use VSFTPD to set up FTP server, VSFTPD server is the best FTP server software, the advantage is small size, can be customized strong, high efficiency

1. Check to see if the VSFTPD software is installed

[Root@linuxsir001 root]# Rpm-qa | grep vsftpd

If there is no display, the instructions are not put on the VSFTPD installation, if there is such a hint below, the proof has been installed.

[Root@linuxsir001 root]# Rpm-qa | grep vsftpd