Vware can only identify the solution of a net card after building ESXi

Vware allocates 4 virtual network cards to ESXi, and after ESXi is built, you can see only one

650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M01/7E/50/wKioL1b8jZSBFDjdAALo-0yPtac791.png "title=" 111. PNG "alt=" Wkiol1b8jzsbfdjdaalo-0yptac791.png "/>

Find a solution by searching the information online

shut down the virtual machine first (important) otherwise the reboot will not take effect , modify the. vmx file under the virtual machine to join the unrecognized NIC

First NIC for example: Ethernet1.virtualdev = "e1000"

Ethernet1 is the first Nic and the second block is Ethernet2

650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M00/7E/54/wKiom1b8jX6iJOVPAAdIFEl4uRc740.png "title=" 112. PNG "alt=" Wkiom1b8jx6ijovpaadifel4urc740.png "/>

Then turn on the virtual machine. You can see that it's been identified.

650) this.width=650; "src=" Http://s1.51cto.com/wyfs02/M00/7E/50/wKioL1b8kMODYVa5AAL9rNM6OBw761.png "title=" 113. PNG "alt=" Wkiol1b8kmodyva5aal9rnm6obw761.png "/>

Important thing to say three times: pre-change, restart before modification, restart before modification

This article is from the "Tommy Lin" blog, so be sure to keep this source http://linyingyong.blog.51cto.com/6609544/1758740

Vware can only identify the solution of a net card after building ESXi