(1) install the lab package
Click OK to go to the following page:
Click "Next", for example:
Note that the following steps are important. You need to select the check boxes for clusters, servers, and modules, and then click applications. The options are as follows:
After the preceding steps are completed, the configuration interface is changed to the following, indicating that the configuration is successful, for example:
In the last step, click "finish", for example:
Click "save", as shown in the following figure:
Next, after synchronizing nodes, click "OK", for example:
(2) After the program package is started to complete configuration synchronization between nodes, the following interface is displayed. Click "start", as shown in:
After startup, you can see the success prompt, as shown in:
(3) generate plug-ins
The plugin is successfully generated, as shown in:
(4) After the propagation plug-in "generates the plug-in", complete the "propagation plug-in", as shown in:
The "propagation plug-in" is successful, as shown in:
(5) Verify the publishing process
Enter the access address: http: // 10.53.105.63/snoop
(The IP address is the IP address of the DM server)
Enter the IP addresses of other nodes in the cluster to view the details:
Http: // 10.53.105.66/snoop
(The IP address is the IP address of another node in the cluster)
We can see that the cluster program has been successfully deployed.
**************************************** ******************************** ****************
Original works, from "Deep Blue blog" blog, welcome to reprint, reprint please be sure to indicate the source (http://blog.csdn.net/huangyanlong ).
Please leave a message or email ([email protected]) indicating that the statement is incorrect. Thank you very much.
**************************************** ******************************** ****************
Was cluster series (11): Build a cluster: Step 9: Release the verification program