Wave various models management chip BMC IP (Intelligent Platform Management Interface) settings

nf5240m3/nf5140m3/nf5280m3/sa5212h2/np5540m3
nf5270m3/nf5170m3/nf8420m3

IPMI Board Integrated management chip BMC IP Settings
Press the DEL key to enter BIOS setup
Select "Server Mgmt"---"BMC network Configuration"---"LAN Channel 1/2"---"Static IP Address"
LAN Channel 1: Refers to the Multiplexing Management Network port, network card 1 interface
LAN Channel 2: Refers to the IPMI management private interface, which is generally required to set this interface


nf8560m2/nf8560m/nf8560

Integrated IPMI management card IP addresses can be viewed and set in the BIOS "Advanced"---"IPMI Configuration"---"Set LAN Configuration"---IP address---the "Static" menu
Press the DEL key to enter the BIOS




MAC address settings

Subnet Mask Settings

Gateway Settings

Description: nf8560m2 Factory Board integrated IPMI management card IP address defaults to: 192.168.1.100
If you change the IP address again, you will need to reboot the server or power off (unplug the power cable) before you can use it properly. nf5220/nf5120/nf5225/nf5280m2

IPMI Board Integrated management chip BMC IP Settings
Press the DEL key to enter BIOS setup
Select "Server Mgmt"---"BMC network Configuration"---"LAN Channel 1/2"---"Static IP Address"
LAN Channel 1: Refers to the Multiplexing Management Network port, network card 1 interface
LAN Channel 2: Refers to the IPMI management private interface, which is generally required to set this interface

Integrated management chip BMC IP settings can be viewed or set in the BIOS "Advanced"---"IPMI 2.0/ipmi Configuration"---"Set LAN Configuration"---"Static" menu
Press the DEL key to enter the motherboard BIOS


NF5270M4/NF5280M4

IPMI Board Integrated management chip BMC IP Settings
Press the DEL key to enter BIOS setup
Select "Server Mgmt"---"BMC network Configuration"---"Configuration address source"---"statically or dynamically"
BMC sharelink Management Channel: Refers to the Multiplexing Management network port, Nic 1 interface
BMC dedicated Management Channel: refers to the IPMI management private interface, which is generally required to set this interface nf8460m3

The post process presses the "ESC" key to enter the BIOS setting select "Setup Utility" to enter the BIOS settings Shared is a multiplexing port, dedicated is a separate port. Login page IPMI motherboard Integrated management feature remote login usage Introduction

Note that if the above user password is incorrect, please use user name: root password: Superuser or Username: admin Password: admin