When easyradius is used by many friends, because of the need to use ddns, such as every step, there are still 3322, these domain names often encounter problems, it is very troublesome!
For example, each step is a problem once in a month, and 3322 of them start to charge fees.
In other cases, when the route is restarted, it is updated to 3322. As a result, the IP address is not synchronized, resulting in temporary access failure.
And so on. These problems will be solved now.
Operation Method:
1. To use active ddns updates, the following conditions must be met:
A. Obtain the address updated by ddns from easyradius. If there is a master address or a slave address, you can copy the address directly from it.
B. Bind the address to the ddns update of wayos so that wayos can actively upload IP information to easyradius.
2. After learning about a rough process, we will start to operate it now.
A. Go to the billing system, go to [user management]-[region management], double-click the region to be operated, and open communication management settings.
Many people ask me what is the management address above? If you fill in what you previously, you can keep what you want. If it is new, it is recommended to fill in an IP address once? It's okay if you don't fill it out. I just need to wait for the next synchronization and it will be automatically filled in. Do you understand this? If you have filled it out before, keep it. If you haven't filled it out, it doesn't matter. That's it.
B. Go to wayos, open basic settings, ddns settings, and bind the URL copied from the top to a WAN port according to the following instructions.
Simply add a URL. If the master and slave addresses in a region must be updated on our own initiative, copy the URLs of the master and slave addresses respectively and bind them separately, we recommend that you bind it to different WAN ports.
If you have any questions, you can directly add my QQ: 561454825 or call 13779953060.