Web Settings of Windows Mobile simulation Simulator

To ensure that the host is connected to the Internet, follow these steps:

1. Open ActiveSync, click "file" --> "connection settings", and select "DMA" under "allow connections to one of the following ports ".

2. Open vs2005, click "Tools"> "device simulation manager", and select a pocketpc se 2003 simulator. Right-click "Connect" in the menu ". After the simulator starts, click "insert base". In this case, connect to the simulator through ActiveSync and synchronize data.

3. In the simulator, click "start" --> "set" and click the "connection" tab.

(1) Select "Nic ":

Select "My Nic connection" and "Default unit Settings ".

Under "click the adapter to modify Settings", select "asyncmac ndiswan miniport", select "use server assigned IP Address", and click "OK" in the upper right corner ", the prompt "the new settings will be applied the next time the adapter is used. If the adapter is currently inserted into the device, remove it first, and then re-insert the adapter to apply the settings .", Click "OK" and "OK ".

(2) Select "connection" on the "connection" tab ":

On the "advanced" tab, click "select Network" and select "unit Settings" under "use when the program automatically connects to the Internet". The default value is "Internet Settings ", then, click "OK", "OK", and "X" in the upper right corner to return.

4. Now, you can access the Internet. Click Start> Internet Explorer> favorites> MSN mobile to display the page. If the web page cannot be opened, select the simulator in "device simulator manager", right-click the "Remove base" button in the menu, and then click "insert base" to connect to ActiveSync again, no problem.