webstorm11.0.3 Connecting to FTP

First, the tool

webstorm11.0.3

FTP tool: Beyond Compare 3

Second, step

1. Open the Project project, follow the path, open the FTP configuration interface

2, in the FTP configuration interface

(1) Upper right corner + # New configuration, select the correct connection type

(2) Configure FTP Host,username,pwd and other information, after configuration, you can click Test FTP connection testing FTP can connect successfully

(3) After the connection is successful, set the server file path

(4) Set the publishing path in the Mapping tab (the server file path setting in the previous step, which will default to the path above when opened)

3, back to the development of the main interface, in Project engineering arbitrary file right-click (usually compared or upload a single file mostly), there are upload and sync options. Upload upload files directly. Sync is a contrast and action that can change the server to local, but the server's files are read-only. At the right edge of the interface, you can quickly find the difference between two files based on a small marker

webstorm11.0.3 Connecting to FTP