What about the blue screen when Windows enters system Safe mode

Both the normal access system and the system security mode are blue screen. Sometimes I use a computer and suddenly I use a blue screen. Memory causes of the blue screen, is too much, just a detail of what the reason, if it is a desktop computer directly to open the chassis, the memory is unplugged, the memory of the finger part of the rub and then plug back, preferably at the same time the memory wipe the groove also wiped. The chassis has been opened to check if there is too much dust and too much dust to clean up. In general, there are too many system blue screens caused by memory reasons, so try the memory first for whatever reason.

In general, this system configuration file caused by the computer blue screen is not very likely, but try it, press F8 on power on, and choose [Last Known Good Configuration (your most recent settings to work)] on the Windows Advanced Options menu that appears, and automatically restarts the computer when you return. And then try to get into the system normally? The odds are not great, but try again. Sometimes it's because of system reasons.

Hard drive bad road caused by the blue screen fault manifestation: Whether it is the normal boot system or other methods to start the system, will not stop the disk self-test, has been self-test, this self-test takes a long time, bad too much time will never be checked down. A bad road may be less self test. Sometimes there will be a blue screen situation. Solution: No solution, can only change the hard disk. This article is only recommended here to use the MHDD Disk Scan tool to scan the hard drive to see if there is a bad path.

Generally speaking, when the computer resolution is too high, this situation occurs, such as the display is only 14 inches, but tuned to 21-inch display resolution, not black screen blue screens are strange. At this point, whether it is a normal boot system, or use Safe mode will appear this way, the solution is to press F8 into the Windows Advanced Options menu on the power-on, find in the Advanced Options menu [Enable VGA mode] and enter the entry.

After normal access to the system, it is the same as normal operation, in the desktop space to select Properties, open the Display Properties program window, find and click to switch to the Settings tab, the screen resolution here to choose their own appropriate resolution, then restart the computer.

Note: We can according to their actual reasons for the corresponding investigation. In the end, or the system back to the first, and then reload the system to try, and then no longer directly to the relevant maintenance point maintenance.